User manual MUSE M-1015-MR

[. . . ] * If there is a scratch, dirt or fingerprints on the disc, it may cause tracking error. FUSE holder (15 A) M-1015 MR User Manual CAR RADIO CD/MP3 PLAYER WITH USB/SD/MMC * Don’t store discs in places with high temperatures or high humidity, they can become warped. After playing, store the disc in its case. UNPACK YOUR UNIT When you unpack your new car radio, make sure that you have removed all the accessories and information papers: Main unit User manual Accessories: 1 2 3 4 5 6 7 11. Before you install the unit, remove absolutely the two transportation screws on top of the unit. 8 9 10 11 12 Notice on disc Use such discs may cause malfunction or breakdown of the internal mechanism: with large scratches; with irregular shape; cracked; with any cellophane tape or other glue on it or with peeling off marks; with protection sheet; equipped with stabilizers, etc. Caution! [. . . ] Manual/automatic tuning - Manual Tuning Press and hold button or (3/23) until “MANUAL” shows on display, then press button or (3/23) continuously to select a station downward or upward. Press and hold button or (3/23)to tune the station with a faster speed. - Automatic Tuning Press or (3/23) once, the radio automatically searches a station upward or or (3/23)once to downward respectively and plays when it finds a station. Scanning/memorizing stations automatically - By AMS/SCH button (6) In tuner mode, press and hold AMS/SCH button for 3 seconds to start scanning for stations and store them automatically in memory. Press AMS/SCH button (6) the radio plays each preset station for a few seconds. Press AMS/SCH (6) again or numeric buttons 1-6 to listen to corresponding station. Press and hold one of the 1- 6 Number buttons (14-19) for 2 seconds until LCD shows the corresponding number, which indicates that station is stored in the corresponding number button. Under radio mode, press 1- 6 Number buttons (16-21) to listen to stored stations. When you are listening to a station stored on a number button, press and hold another number button for more than 2 seconds to store the station on this number button. -- RDS (Radio Data System) Operations -This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received and can automatically switch to the broadcast station with the best reception as you travel on long distances (AF switching). A traffic announcement broadcast from an RDS station, no matter what mode you are, additionally, if EON information is received, enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information. This function is not available in some areas. Alternative frequency (AF) The AF function switches to a different frequency on the same network in order to maintain optimum reception. In FM mode, press AF button (24), certain program will be automatically searched and received. If the reception of the current broadcast station deteriorates, “AF” appears in the display and the radio searches for the same program on another frequency. Press AF button (24) again to cancel this function When reception is bad, the “AF” icon will blink. Press and hold AF button (24) for 5 seconds, the unit will be under “REG ON” or “REG OFF” mode: REG ON: Should be selected to list the local broadcast of the current station, even if there is a national broadcast of this station. REG OFF: Should be selected to listen to the national broadcast of the current station. Traffic alarm (TA) In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Press TA button (7), when LCD shows “TA”, traffic program will be automatically searched and saved, when LCD shows “TP”, this means that the RDS broadcast station being received has traffic announcement programmes. If you press TA button (7) while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. Press TA button (7) again to stop searching, “TA” goes off. [. . . ] Cleaning the Connector If the connector between the main unit and the front panel is dirty, may result in abnormal working condition. To avoid such problems, please detach the front panel, and clean the connector with an alcohol swab. Gently clean and avoid damaging the connector. Note: Due to continuous product improvement, specifications and design are subject to change without prior notice. To prevent any accident due to this type of beam, the set should only be opened by properly trained personnel. [. . . ]