User manual NAVIGON 5110

[. . . ] This symbol showing a crossed-through refuse container signifies that, within the European Union, the product must be disposed of as sorted waste. This applies both to the product itself, as well as to all accessories that carry this symbol. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced for any purpose whatsoever without the express written consent of NAVIGON AG, nor transmitted in any form either electronically or mechanically, including photocopying and recording. [. . . ] Note: If you change the route options, these remain valid for subsequent navigation. Information about how to change individual route profile settings can be obtained by tapping on the corresponding (Help) button. For detailed information about the functions in the TURN-BY-TURN LIST window, please refer to chapter "Turn-by-Turn List" on page 44. If the received GPS signal is insufficient, the following message will appear: "GPS reception is currently not sufficient. Wait until GPS reception is sufficient for determining position, the route will be recalculated and you can begin navigation. The route will be calculated using the centre of the specified location as starting point. Every destination that you enter, and the destinations from the LAST DESTINATIONS list may be saved to the FAVOURITES list. This makes sense if you frequently navigate to a particular destination. Enter a destination as described in "Specifying a new destination" on page 21. If you want to define the destination as your home address, tap on the black. Only one destination from the FAVOURITES list can be defined as your home address. You can then begin navigation to this destination very quickly by tapping the Take Me Home button in the MAIN WINDOW. Select the destination which you want to define as your home address from the FAVOURITES list. Your home address now appears in the FAVOURITES list marked by a house symbol. It is possible to plan routes without GPS-reception, in the comfort of your home for example. Planned routes can be saved for later use, this allows you to plan as many routes as you like e. The starting point of a route, is the point at which you want to begin your trip. If you are at home planning a route for your holidays, you could, for example, enter your hotel as the starting point. The starting point is only important if you want to see a planned route on the map, but currently have no GPS reception, or you are not currently at the planned starting point. The starting point that you enter therefore has the flow number "0". As soon as you begin navigation, your current location will be used as the starting point for the route calculation. The first stage is therefore the trip to the route point with the flow number "1". [. . . ] Above the list, the Traffic information button shows the type of traffic messaging listed and how many messages of this type are listed. For each traffic message in the list, information about the location and type of traffic obstruction will be displayed. In the TMC SETTINGS window, you can set and configure the TMCsender, this will determine the effect a received traffic message concerning your route will have on consequent routing. hold station: Use the arrow buttons in the station section to tune into another station. [. . . ]