User manual NIKON AF 28-105MM F/3.5-4.5D IF

[. . . ] If you rotate the DC ring after focusing, or during focus lock in autofocus photography, your subject will be out of focus. With the DC ring at either the F or R side, the distance scale may not show the correct distance. The effect of defocus image control depends on subject conditions such as subject-to-background distance, subject-to-foreground distance, etc. [. . . ] The effect of defocus image control depends on subject conditions such as subject-to-background distance, subject-to-foreground distance, etc. To obtain the desired effect, take a series of shots with the DC ring at various settings. Rounded diaphragm opening makes out-of-focus elements appear more natural. Thanks to Nikon's Rear Focusing (RF) system, the rear lens elements move inside the lens while focusing, so there is no increase in the overall length of the lens. Distance information used for 3D Matrix Metering or the 3D Multi-Sendor Balanced Fill-Flash will be transmitted instantly from the lens to the camera body. Before using your new lens, read this manual carefully so you get the maximum value from your lens now and for years to come. Do not attach the following accessories directly to the lens; they could damage the lens CPU contacts; Auto Extension Ring PK-1, Auto Extension Ring PK-11, K1, Ring, Auto Ring BR-4, Macro Adapter Ring BR-2 or K2 Ring. (Use PK-11A instead of PK-11, BR-6 instead of BR-4, BR-2A instead of BR-2. But focusing is inaccurate Correction value for center-weighted metering When using the F6, you can correct the exposure value by setting "b6: Screen Conpensation" to "Except for B and E" in the Customize menu. Set this to "Except for B and E" regardiess of whether the correction weight is set to "0" When using the F5. set the compensation for the exposure value in custom setting number 18. When using a camera from the F4 series, turn the exposure adjustment diat for the finder screen to set the compensation. for details , reter to the instruction manual for the camera you are using. Blank=Unsuitable However, when using the M screen, this value is not used in order to allow you to use a rate of 1 to 1 or higher for close-up photography. When using a camera other than one listed above with a B2/B3, E2/E3, or K2/K3 screen refer to the B, E, or K column respectively. ) to infinity () Distance imformation: Output into camera body Aperture scale: f/2 to f/16 on both standard and aperture-directreadout scales Minimum aperture lock: Provided Diaphragm: Fully automatic Focusing: Nikon Rear Focusing (RF) system Exposure measurement: Via full-aperture method for Al cameras or cameras with CPU interface system; via stop-down method for other cameras Mount: Nikon bayonet mount Attachment size: 72mm(P=0. [. . . ] When using a camera other than one listed above with a B2/B3, E2/E3, or K2/K3 screen refer to the B, E, or K column respectively. ) to infinity () Distance imformation: Output into camera body Aperture scale: f/2 to f/16 on both standard and aperture-directreadout scales Minimum aperture lock: Provided Diaphragm: Fully automatic Focusing: Nikon Rear Focusing (RF) system Exposure measurement: Via full-aperture method for Al cameras or cameras with CPU interface system; via stop-down method for other cameras Mount: Nikon bayonet mount Attachment size: 72mm(P=0. Use the minimum aperture lock lever to lock the lens aperture at f/16. [. . . ]