User manual NIKON AF-3-AF-4 GELATINE FILTER HOLDER

[. . . ] The effects of vibration reduction may vary according to shooting conditions and use. ) · This lens employs a Silent Wave Motor to drive the focusing mechanism, making autofocusing smooth, silent and almost instantaneous. More accurate exposure control is possible when this is mounted on a Nikon camera with 3D color matrix metering capability, because subject distance information is transferred from the lens to the camera. Superior optical performance and rendering characteristics are maximized with the use of one aspherical lens element and one extra-low dispersion (ED) glass element, which ensure correction of chromatic aberration. [. . . ] Mounting mark on the camera, and rotate the lens counterclockwise until it clicks into place. Be sure that the lens is in the correct position when the mounting index 9 is on the top of the lens. Align the lens hood attachment index ( , either of two indexes) 2 on the hood with the lens hood mounting index 4 on the lens, and turn the hood 1 counterclockwise (as viewed when holding the camera With the lens facing away from you) until it clicks into place (Fig. Be sure that the lens hood mounting index is aligned with the lens hood setting index ( ) 3. Next, while pressing the shutter-release button halfway, manually rotate the lens focus ring 8 to fine-tune focus. Note: Do not attempt to rotate the focus ring while autofocus is operating. If autofocus stops operating, release and press the shutter-release button halfway again. Hold the lens hood by the base (near the lens hood attachment index) and turn clockwise, as viewed when holding the camera with the lens facing away from you, to detach. Before focusing, rotate the zoom ring 5 to adjust the focal length until the desired composition is framed. If your camera has a depth-offield preview (stop-down) button or lever, depth of field can be previewed through the camera viewfinder. Be careful not to allow the CPU contacts 0 to become dirty or damaged. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion from the center to the outer edge, taking care not to leave traces or touch other parts of the lens. Never use organic solvent such as thinner or benzene to clean the lens. When storing the lens in its flexible lens pouch, attach both the front and rear lens caps. The lens can also be stored with the lens hood 1 attached in the reverse position. When the lens is mounted on a camera, do not pick up or hold the camera and lens by the lens hood 1. When the lens will not be used for an extended period of time, store it in a cool, dry place to prevent mold and rust. Be sure to store the lens away from direct sunlight or chemicals such as camphor or naphthalene. Do not get water on the lens or drop it in water as this will cause it to rust and malfunction. [. . . ] Do not get water on the lens or drop it in water as this will cause it to rust and malfunction. 76º­15º20' 18, 24, 35, 50, 70, 105mm Output to camera Manually via separate zoom ring Nikon Internal Focusing (IF) system, Autofocus using a Silent Wave Motor; manually via separate focus ring Lens-shift method using voice coil motors (VCMs) 0. Attachment Ring SX-1 Other accessories may not be suitable for use with this lens. G-type AF-S DX Zoom-NIKKOR lens with built-in CPU and Nikon bayonet mount (specially designed for use with Nikon digital-SLR--Nikon DX format--cameras) 18mm­105mm f/3. [. . . ]