User manual NOKIA 2125

[. . . ] Nokia 2125 User's Guide Issue 1 931169X26 Copyright © 2005 Nokia. All rights reserved. i LEGAL INFORMATION Copyright ©2005 Nokia. Nokia, Nokia Connecting People, Nokia 2125, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc. [. . . ] In the standby mode, select Menu > Settings > Call settings > Speed dialling > On or Off. 14. Call settings Anykey answer Anykey answer allows you to answer an incoming call with a brief press of any key except the power, right selection, or end key. In the standby mode, select Menu > Settings > Call settings > Anykey answer > On or Off. Minibrowser confirmation To activate minibrowser confirmation, in the standby mode, select Menu > Settings > Call settings > Minibrowser confirmation > None, On connection, On exit, or Both. Calling cards If you use a calling card for long distance calls, save the calling card number in your phone. Contact your calling card company for more information. Automatic redial Occasionally your network may experience heavy traffic, which results in a fast busy signal when you dial. With automatic redial activated, your phone redials the number (number of times is specified by the network), and notifies you once the network is available. In the standby mode, select Menu > Settings > Call settings > Automatic redial > On or Off. Save information 1. In the standby mode, select Menu > Settings > Call settings > Calling card. Scroll to one of the four card memory locations, and select Options > Edit > Dialling sequence. Copyright © 2005 Nokia. + card no. -- Dial the 1-800 access number, phone number, then enter the card number (plus PIN if required). + phone no. -- Dial the 1-800 access number, card number (plus PIN if required), then enter the phone number. + card no. --Dial the prefix (numbers that must precede the phone number) and phone number, then enter the card number (plus PIN if required). Enter the required information (access number or prefix and card number), and select OK to confirm your entries. Press the end key to return to standby mode, and enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. Press and hold the call key for a few seconds until Card call is displayed. When you hear the tone or system message, select OK. Data and fax calls Data or fax calls is a network service. If your wireless network operator supports this feature, you can set up the device to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected. For better performance during data calls, place the device on a stationary surface. For more information on connectivity, see the PC/PDA Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia web site at http://www. nokia-asia. com. In the standby mode, select Menu > Settings > Call settings > Data/ fax calls > Incoming data/fax call and one of the following options: Make calls After you have saved your calling card information in your phone, make a call with your calling card. In the standby mode, select Menu > Settings > Call settings > Calling card. Scroll to the calling card of your choice, select Options > Select > OK. 32 Copyright © 2005 Nokia. [. . . ] The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2. 0 watts/kilogram (W/kg)*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, To make an emergency call: 1. [. . . ]