User manual NOKIA 32

[. . . ] User guide DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product DTX-3 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www. nokia. com/phones/declaration_of_conformity/. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. [. . . ] After that, the PBX connects the call. Making an outgoing test call Make a call to the PBX extension number to which the Nokia 32 terminal is connected. After that, you hear a dial tone, provided that the Nokia 32 terminal has been set to emit a dial tone, and you can dial the desired number. The PBX can also be configured to route certain numbers automatically. Functionality in extension mode Outgoing call on the extension line, mode A 1 Key in the number of the extension to which the Nokia 32 terminal is connected. The Nokia 32 terminal establishes the call. Copyright © 2003 Nokia. All rights reserved. 20 Outgoing call on the extension line, mode B 1 Key in the number of the extension where the Nokia 32 terminal is connected. The Nokia 32 terminal establishes the call. Incoming call on the extension line, mode A 1 The Nokia 32 terminal answers the call and opens the extension line. 4 The PBX routes the call as if the call would come from an extension telephone. Incoming call on the extension line, mode B 1 The Nokia 32 terminal answers the incoming call and opens the extension line. 2 The Nokia 32 terminal sends a predefined number to the PBX extension. Connecting the Nokia 32 terminal to a fax machine The Nokia 32 terminal supports connection to Group 3 analog fax machines. The fax machine is connected to the RJ11 trunk connector of the Nokia 32 terminal with a 2-wire connection. Note: The fax functionality must be activated on your SIM card before you can send or receive faxes. Copyright © 2003 Nokia. All rights reserved. 22 Sending faxes 1 Connect the analog fax machine to the Nokia 32 terminal. Example: *01*recipient's number Receiving faxes Incoming faxes are received in the same way as using a fixed line. If the Nokia 32 terminal does not receive information about the incoming call type from the GSM network, dial *01#* to force the Nokia 32 terminal to receive the next incoming call as a fax call. This temporary setting is deactivated by receiving a fax or by dialling #01#*. For the light indicators when waiting for a fax call, see "Light indicators" on page 25. Configuration In the Fax connection menu of Nokia 32 Configurator software, you can select to route incoming fax calls to an analog fax (RJ-11 trunk port, default) or a PC fax (RS232 port). Copyright © 2003 Nokia. All rights reserved. 23 To force the Nokia 32 terminal to handle all calls as analog fax calls, select the Permanent fax mode in Nokia 32 Configurator. To disable the Permanent fax mode, select either PC fax or Analog fax mode. In the Permanent fax mode, it is not necessary to use the *01* prefix when sending an analog fax. To make the configurations with a landline telephone, dial: · **####**1234#12**0# for Analog fax mode (default) · **####**1234#12**1# for PC fax mode · **####**1234#12**2# for Permanent analog fax mode (only fax calls available) After the command, key in 555**# to save the new settings and restart the terminal. Note: **####**1234# activates the Configuration mode of the Nokia 32 terminal. When you have given the commands successfully to the terminal with the landline telephone, you hear the OK tone in the receiver. For the light indicators in the Permanent fax mode, see "Light indicators" on page 25. Copyright © 2003 Nokia. [. . . ] High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. When it warms up (to its normal temperature), moisture can form inside, which may damage electronic circuit boards. · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the terminal. · Unauthorised antennas, modifications or attachments could damage the terminal and may violate regulations governing radio devices. Copyright © 2003 Nokia. [. . . ]