User manual NOKIA 5300

[. . . ] XpressMusic DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-146 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www. nokia. com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. For more information, see product Eco-Declaration or country specific information at www. nokia. com. [. . . ] To activate the phone for data transfer or image printing, connect the data cable. Select mode. , and select from the following options: Nokia mode -- to use the cable for PC Suite Printing & media -- to use the phone with a PictBridge compatible printer or with your compatible PC Data storage -- to connect to a PC that does not have Nokia software and use the phone as a data storage device To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode, Printing & media, or Data storage. Call Select Menu > Settings > Call and from the following options: Call divert -- to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. Voice clarity > Active -- to enhance speech intelligibility especially in noisy environments Anykey answer > On -- to answer an incoming call by briefly pressing any key, except the power key, the camera key, the left and right selection keys, or the end key Automatic redial > On -- to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Speed dialling > On -- to dial the names and phone numbers assigned to the speed-dialing keys, 2 to 9, by pressing and holding the corresponding number key 52 Settings Call waiting > Activate -- to have the network notify you of an incoming call while you have a call in progress (network service). Summary after call > On -- to briefly display the approximate duration and cost (network service) of the call after each call Send my caller ID > Yes -- to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network. Outgoing call line -- to select the phone line 1 or 2 for making calls if supported by your SIM card (network service). Slide call handling -- to set the phone to answer calls when you open the phone and to end calls when you close the phone Phone Select Menu > Settings > Phone and from the following options: Language settings -- To set the display language of your phone, select Phone language. Automatic selects the language according to the information on the SIM card. Security keyguard -- to set the phone to ask for the security code when you unlock the keyguard. Automatic keyguard -- to lock the keypad automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Welcome note -- to write the note that is shown when the phone is switched on Flight query > On -- The phone asks every time when it is switched on whether the flight profile shall be used. The flight profile should be used in areas sensitive to radio emissions. 53 Settings Phone updates -- to receive phone software updates from your service provider (network service). Operator selection > Automatic -- to set the phone to automatically select one of the cellular networks available in your area. With Manual you can select a network that has a roaming agreement with your service provider. Help text activation -- to select whether the phone shows help texts Start-up tone > On -- The phone plays a tone when it is switched on. Enhancements This menu or the following options are shown only if the phone is or has been connected to a compatible mobile enhancement. Select an enhancement, and depending on the enhancement, from the following options: Default profile -- to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer -- to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Select Automatic to set the lights on for 15 seconds after a key press. Text phone > Use text phone > Yes -- to use the text phone settings instead of headset or loopset settings Configuration You can configure your phone with settings that are required for certain services to function correctly. Select Menu > Settings > Configuration and from the following options: 54 Settings Default config. To set the configuration settings of the service provider as default settings, select Options > Set as default. [. . . ] Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. [. . . ]