User manual NOKIA 636

[. . . ] c1caus. frm Page 1 Thursday, December 19, 1996 12:46 PM OWNER'S MANUAL NOKIA 636 1 c1caus. frm Page 2 Thursday, December 19, 1996 12:46 PM NOKIA and the Arrows logo are registered trademarks of Nokia Corporation, Finland. Nokia Mobile Phones operates a policy of continuous improvement, therefore, we reserve the right to make changes and improvements to any of the products described in this guide without prior notice. Issue 4 2 c1caus. frm Page 3 Thursday, December 19, 1996 12:46 PM Contents IMPORTANT SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . 9 List of Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The phone asks you to enter the name to be recalled (NAME?). 2 Press the ABC key instead of entering the name. The phone now prompts you to enter the location to be recalled (LOCATION?). 3 Enter the desired location number and press OK or start scroll- ing by using the key. The phone number stored in the location will be displayed. Use the key to view other memory locations in use. · If the selected memory location is empty, the message LOCA- TION EMPTY will be briefly displayed, and the phone exits the find function if you pressed OK. · If you started scrolling without pressing OK, the message LO- CATION EMPTY will be briefly displayed, and the next memory location in use will then be displayed. 4 Call the displayed name or phone number by pressing the SEND key. Moving Names and Phone Numbers To use the quick move method: 1 Recall the phone number and name to be moved. 2 Press and hold OK for one second. The message MOVED will be displayed confirming that the information has been moved to the first empty memory location displayed in the upper right corner of the display. · If there is no empty location, the message NO SPACE is dis- played, and the information you tried to move will reappear on the display. You can reattempt to move it as described above, or you can clear the display by pressing and holding the CLR key. 26 c1caus. frm Page 27 Thursday, December 19, 1996 12:46 PM To move the contents of a memory location: 1 Recall the phone number and name to be moved as described in Recalling Names and Phone Numbers on page 25. 2 Press the MENU key and scroll to the menu function STORE TO MEMORY by using the key and press OK, or press MENU 1 as a shortcut access method. The message ALREADY STORED is briefly displayed, and then the phone prompts you to move the information to the first empty memory location (e. g. , MOVE TO 5?), or prompts you to enter the memory location where you want to move the information to, if there is not a free memory location (MOVE TO?). 3 Press OK or first enter a specific memory location number and then press OK. · If the location you entered in is already in use, the phone prompts you to overwrite the contents of the location (REPLACE CONTENT?). The message MOVED will be briefly displayed confirming that the information has been moved to the memory location displayed in the upper right corner of the display. · When the MOVE TO or REPLACE CONTENT prompt is displayed and you do not want to continue, either press the CLR key, or wait until the message NOT MOVED appears. The phone exits the move function, and the information you tried to move will then reappear on the display. You can reattempt to move it as described above, or you can clear the display by pressing and holding the CLR key. Erasing a Memory Location To erase a memory location by name: 1 Press the MENU key and scroll to the menu function ERASE NAME by using the key and press OK, or press MENU 3 as a shortcut access method. The phone asks you to enter the name to be erased (NAME?) 27 c1caus. frm Page 28 Thursday, December 19, 1996 12:46 PM 2 Enter the name or the first letter(s) of the name you want to erase and press OK, or start scrolling by using the key. The name, or if you entered the first letter(s) only, the first name beginning with the letter(s) is displayed. You can view other stored names in alphabetical order by using the key. · If no matching name is found, the message NAME NOT FOUND will be briefly displayed, and the phone exits the erase function if you pressed OK. · If you started scrolling without pressing OK, the message NAME NOT FOUND is briefly displayed, and the next name in alphabetical order will then be displayed. 3 When the desired name is displayed, press OK, if you want to erase the memory location. The message ERASED is briefly displayed confirming that the memory location has been erased, and the phone then displays the next name in alphabetical order. · If you do not want to erase the name, you can view the other stored names by using the key, or you can exit the erase function by pressing the CLR key or any key except PWR. The message NOT ERASED is briefly displayed, and the phone exits the menu facility. You can also exit the erase function by just waiting until the message NOT ERASED appears briefly on the display. To erase a memory location by location number: 1 Press the MENU key and scroll to the menu function ERASE NAME by using the key and press OK, or press MENU 3 as a shortcut access method. The phone asks you to enter the name to be erased (NAME?). 2 Press the ABC instead of entering the name. The phone now prompts you to enter the number of the memory location to be erased (LOCATION?) 3 Enter the location number and press OK or start scrolling by using the key. 28 c1caus. frm Page 29 Thursday, December 19, 1996 12:46 PM The phone number stored in the selected location will be displayed. Use the key to view other memory locations in use. · If the selected memory location is empty, the message LOCA- TION EMPTY is briefly displayed, and the phone exits the erase function if you pressed OK. · If you started scrolling without pressing OK, the message LO- CATION EMPTY is briefly displayed, and the next memory location in use will then be displayed. 4 Press OK, if you want to erase the memory location. The mes- sage ERASED is briefly displayed confirming that the memory location has been erased, and the phone then displays the next memory location in use. · If you do not want to erase the location, you can view the other occupied memory locations by using the key, or you can exit the erase function by pressing the CLR key, or any key except PWR. The message NOT ERASED is briefly displayed, and the phone exits the menu facility. You can also exit the erase function by just waiting until the message NOT ERASED appears briefly on the display. Note: If you are erasing memory location 0 containing the stack of the five last dialed numbers, the phone prompts you to confirm the erase operation (ARE YOU SURE?). Press OK, if you want to erase the stack, or any other key except OK (or PWR) to cancel the erase operation. [. . . ] The unit uses the Mobile Charger LCH-6 or the Mobile Installation Charger LCM-1 for power supply. 50 NiCd NiMH c1caus. frm Page 51 Thursday, December 19, 1996 12:46 PM HSU-2 Light Handset The Light Handset with no display or keypad provides privacy for conversation. When you lift the Light Handset from its holder, the loudspeaker and microphone will be muted and you can speak in privacy. When you replace the handset in its cradle, the call is terminated unless you have pressed the MENU key on your phone in order to return to the handsfree mode. [. . . ]