User manual NOKIA BH-102

[. . . ] Please check with your Nokia dealer for details. 2 © 2008 Nokia. All rights reserved. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Introduction With the Nokia Bluetooth Headset BH-102, you can make and receive calls while on the move. [. . . ] Ensure that your phone is switched on and the headset is switched off. Press and hold the multifunction key (for about 4 to 8 seconds) until the indicator light starts to flash quickly. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth Switch on or off devices. Select the headset from the list To switch on, press and hold the of found devices. The pair and connect the headset to headset tries to connect to a your phone. The fully charged battery has power for up to 10 hours of talk time or up to 250 hours of standby time. When battery power is low, the headset beeps once every minute and the indicator light flashes quickly. To switch off, press and hold the multifunction key for about 4 to 8 seconds. Pair the headset 5 connection separately after pairing. If the pairing is successful, the headset appears in the phone menu where you can view the currently paired Bluetooth devices. When the headset is connected to your phone and is ready for use, the indicator light flashes slowly. Basic use Put on the headset To use the headset on your right ear, attach the earloop as shown in Figure 7; to use the headset on your left ear, attach the earloop from the other side. Slide the earloop over your ear (9), and gently push the earpiece into your ear. Point the headset towards your mouth (10). Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. To redial the number you last called (if your phone supports this feature with the headset), when no call is in progress, press the multifunction key twice. To activate voice dialling (if your phone supports this feature with the headset), when no call is in progress, press and hold the 6 © 2008 Nokia. To switch a call between the headset and a compatible phone, press and hold the multifunction key for about 2 to 4 seconds. and press and hold the multifunction key for over 8 seconds until the headset beeps twice and the indicator light flashes quickly. To reset the headset if it stops functioning, even though it is charged, plug the headset into a charger. Troubleshooting If you cannot connect the headset to your compatible phone, check that the headset is charged, switched on, and paired with your phone. Clear settings or reset To delete the pairings from the headset, switch off the headset, Battery information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. [. . . ] Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time. © 2008 Nokia. All rights reserved. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. [. . . ]