User manual NOKIA BH-207

[. . . ] Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. 2 Introduction The Nokia Bluetooth Headset BH207 allows you to make and receive calls while on the move. [. . . ] Connect the charger to a wall charger before using it with this outlet. If charging does not start, disconnect the charger, plug it in again, and retry. The fully charged battery has power for up to 7 hours and 30 minutes of talk-time or up to 140 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power is low, the indicator light flashes quickly. Switch the headset on or off To switch on, press and hold the multifunction key until the indicator light is displayed. To switch off, press and hold the multifunction key until the indicator light briefly flashes several times and turns off. Pair the headset 1. Ensure that your phone is switched on and that the headset is switched off. Press and hold the multifunction key (for about 8 seconds) until the indicator light is continuously displayed. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may 5 English need to make the connection separately after pairing. If the pairing is successful, the indicator light briefly flashes five times, and the headset appears in the phone menu where you can view the currently paired Bluetooth devices. The headset is now ready for use. Basic use Wear the headset Slide the earloop behind your ear, and point the headset toward your mouth. To use the headset on the left ear, gently flip and rotate the earloop as shown in figures 7, 8, and 9. [. . . ] Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. [. . . ]