User manual NOKIA BH-501

[. . . ] Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Issue 1 EN Contents 1. Pair with a phone with music player feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pair with a phone and a music player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Charge the battery This headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the headset. If charging does not start, disconnect the charger, plug it in again, and retry. The fully charged battery has power for up to 7. 5 hours of talk-time and music playing time, and up to 150 hours of standby time. However, the times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power is low, the headset beeps each minute, and the indicator light flashes red. Recharge the battery. Switch the headset on or off To switch on, press and hold the multifunction key until you hear a beep and the indicator light starts to flash blue. To connect the headset to the paired phone or music player that you have last used with it, press the multifunction key. To switch off, press and hold the multifunction key until you hear a long beep. Pair the headset Pair with a phone with music player feature If your phone has a compatible music player feature, you can use the headset to make and answer calls and listen to music from the phone. Press and hold the multifunction key until the indicator light alternately flashes blue and red. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. In some phones you may need to make the Bluetooth connection separately after pairing. If the pairing is successful and the headset is connected with your phone, the indicator light of the headset flashes blue slowly. Pair with a phone and a music player If your phone does not have a compatible music player feature, you can separately pair the headset with your phone and a compatible music player. After pairing and connecting the headset with your phone, do as follows: 1. Press and hold the multifunction key until the indicator light alternately flashes blue and red. Follow the pairing instructions in the user guide for your music player. When the music player asks for a device to pair, select Nokia BH-501 from the list. If you are asked for a Bluetooth passcode, enter 0000 on the music player. If your music player does not have a keypad, the device may use the Bluetooth passcode 0000 by default. If this is not the case, see the user guide of your music player to change the default Bluetooth passcode to 0000. 7 Get started If the pairing is successful and the headset is connected with your music player, the indicator light of the headset flashes blue slowly. To connect the headset also to your phone, make the connection from your phone as described in its user guide. Disconnect the headset To disconnect the headset from your phone or music player, switch off the headset, or follow the instructions in the user guide for your phone or music player. You do not need to delete the pairing with the headset to disconnect it. Reconnect the headset You can pair the headset with up to ten phones and music players in total but connect it to only one device at a time. [. . . ] Recharge the headset for a few seconds. 10 Battery information 4. Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. [. . . ]