User manual NOKIA BH-504

[. . . ] 9 Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Pair the headset with phone or music player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction With the Nokia Bluetooth Stereo Headset BH-504, you can make and answer calls hands-free with your compatible mobile phone and listen to music from a compatible music player. You can use the headset with compatible devices that support Bluetooth wireless technology. [. . . ] The headset beeps, and the green indicator light is briefly displayed. When the headset tries to connect to the last used phone or music player, the green indicator light flashes slowly. When the headset is connected to a device and is ready for use, the blue indicator light flashes slowly. If the headset has not been paired with a device, it automatically enters the pairing mode (see "Pair the headset with phone or music player", p. 6). Switch off To switch off, press and hold the multifunction key for about 5 seconds. If the headset is not connected to a device within about 10 minutes, it switches off automatically. Pair the headset with phone or music player If your phone supports the A2DP Bluetooth profile and has a music player feature, you can use the phone to also play music with the headset. If your phone does not support the A2DP Bluetooth profile, you can separately pair the headset with the phone and a music player that supports this profile. If you have paired and connected the headset with your phone, disconnect the headset from it before pairing the headset with the music player. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the blue indicator light starts to flash quickly. To pair the headset if it has been previously paired with another device, ensure that the headset is switched off, and press and hold the multifunction key (for about 5 seconds) until the blue indicator light starts to flash quickly. Activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices. Select the headset from the list of found devices on your phone or music player. Enter the passcode 0000 to pair and connect the headset to your device. If your device does not have a keypad, it may use this passcode by default. In some devices, you may need to make the connection separately after pairing. If pairing is successful, the headset appears in the menu of your device where you can view the currently paired Bluetooth devices. When the headset is connected to your device and is ready for use, the blue indicator light flashes slowly. Disconnect the headset To disconnect the headset from your device, switch off the headset, or disconnect it in the Bluetooth menu of your device. If you disconnect the headset from a music player while listening to music, first press the play/ pause key to pause the playing. You do not need to delete pairing with the headset to disconnect it. Reconnect the headset To connect the headset to the phone or music player that you have last used with it, switch on the headset, or make the connection in the Bluetooth menu of your device. © 2008 Nokia. All rights reserved. 7 Get started You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. 8 © 2008 Nokia. [. . . ] To reset the headset if it stops functioning, even though it is charged, connect the headset to a charger, and press and hold the multifunction key and the volume up key. The reset does not clear the pairing settings. 10 © 2008 Nokia. Battery and charger information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. [. . . ]