User manual NOKIA BH-801

[. . . ] 9 Pair the headset with a compatible phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use the headset with a strap or a clip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use the headset with several phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clear the settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 13 14 15 15 15 15 16 4. [. . . ] When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Charge the battery This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. If charging does not start, disconnect the charger, plug it in again, and retry. Ensure that you do not accidentally insert the earloop into the charger connector. Disconnect the charger from the headset and the wall outlet. 8 Get started When battery power is low, the headset beeps, and the red indicator light starts to flash. Switch the headset on or off To switch on, press and hold the power key. The headset beeps, and the green indicator light is displayed briefly. When the headset is connected to a paired phone and is ready for use, the blue indicator light flashes slowly. If the headset is not connected to a phone, the green indicator light flashes slowly. The headset beeps, and the red indicator light is displayed briefly. Pair the headset with a compatible phone 1. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Enter the Bluetooth passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection 9 English The fully charged battery has power for up to 6 hours of talk-time or up to 160 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. Get started separately after pairing. If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. Disconnect the headset To disconnect the headset from your phone (for example, to connect the phone to another Bluetooth device), switch off the headset or disconnect it in the Bluetooth menu of your phone. You do not need to delete the pairing with the headset to disconnect it. Reconnect the headset To connect the headset to your phone, switch on the headset, make the connection in the Bluetooth menu of your phone, or press and hold the answer/end key. You can set your phone to connect with the headset automatically when the headset is switched on. To do this in Nokia phones, change your paired device settings in the Bluetooth menu. Troubleshooting If you cannot connect the headset to your phone, do the following: · Ensure that the headset is charged, switched on, and paired with your phone. · Ensure that the Bluetooth feature is activated on your phone. 10 Get started · Check that the headset is within 10 meters (30 feet) of your phone and that there are no obstructions between the headset and the phone, such as walls, or other electronic devices. · To reset the headset if it stops functioning, although it is charged, plug the headset into a charger, and briefly press the power key and the middle of the volume key. This reset does not clear your settings (for example, pairing settings). 11 English Basic use 3. Basic use Place the headset over your ear The headset is provided with an earloop that you can use for a better fit on your ear. To use the headset without the earloop, plug the earpiece into your ear (1), and point the headset toward your mouth. [. . . ] If the automatic answer function is set to on in your phone, the phone automatically answers the incoming call after one ring. Basic use The phone that was first paired with the headset is the default phone. If the headset is switched on within 10 meters (30 feet) of several paired phones, the headset tries to connect to the default phone. If the headset cannot connect to the default phone, the headset tries to connect to the last used phone. If the headset cannot connect to this phone either, one of the other six paired phones can be connected to the headset. [. . . ]