User manual NOKIA MD-5W

[. . . ] Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. 2 Introduction Congratulations on your purchase. With Nokia Bluetooth Speakers MD-5W you can listen to music from your compatible phone or music device and enjoy the highquality audio. You can also use the speakers as a speakerphone thanks to the integrated microphone. [. . . ] When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Connect to power The speakers can be powered by four AA batteries or the supplied charger. 4 Install AA batteries When you use batteries, alkaline batteries are recommended. To install the batteries, ensure that the speakers are off, and open the cover of the battery compartment by pushing the lower part of the cover and pulling the cover up. Place the batteries as indicated in the compartment, and push the cover until it snaps into place. During long periods where the speakers are not used, remove the batteries to prevent damage from battery leakage. When battery power falls low, the red indicator light starts to flash and the speakers beep once a minute. Connect to wall outlet To use the speakers with the charger, connect the charger to a wall outlet, and plug the charger cable to the power connector. If rechargeable batteries are placed in the battery compartment, they are not charged by the charger. Switch the speakers on or off To switch on, press and hold the power key until the blue indicator light is displayed. To switch off, press and hold the power key until the red indicator light is displayed. Connect the speakers You can connect the speakers to a compatible device (such as a mobile phone or music player) using Bluetooth wireless technology or the supplied cable. Pair and connect using Bluetooth wireless technology The following instructions apply for a mobile phone but the procedure is the same for a music player, except that you may not need to give the Bluetooth passcode. Press and hold the power key until the blue and red indicator lights start to alternate. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. Enter the Bluetooth passcode 0000 to pair and connect the speakers to the phone. In some phones you may need to make the connection separately after pairing. If the pairing is successful, the blue indicator light flashes five times, and the speakers appear in the phone menu where you can view the paired Bluetooth devices. Connect using a cable You can connect the speakers to a compatible device with the supplied CA-63U cable. To connect the speakers to a device that has a 3. 5-mm audio connector, plug the cable into the audio input on the speakers and the audio connector on the device. Basic use Adjust the volume To set the volume of the speakers, press either volume key. If the sound level of the speakers becomes too low when using 6 battery power, change the batteries. Listen to music To listen to music, connect the speakers to a compatible music The speakers can be used for call handling if connected to a compatible phone using Bluetooth wireless technology. Warning: Listen to music To make a call, use your phone in at a moderate level. Continuous exposure to the normal way when the speakers high volume may damage your are connected to your phone. toward the microphone on the To play music, select a track on your speakers. [. . . ] Press and hold the volume down and power keys until the purple indicator light is displayed. Press and hold the volume down key until the blue indicator light is displayed. To reset the speakers if they do not work, remove the batteries and unplug the speakers from the charger. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. [. . . ]