User manual NOKIA SPEAKERPHONE HF-200

[. . . ] Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. ENGLISH Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. For your safety Read these simple guidelines. Interference All wireless devices may be susceptible to interference, which could affect performance. Introduction With the Nokia Speakerphone HF-200, you can make and answer calls hands free. You can connect the speakerphone to a compatible mobile device that supports Bluetooth wireless technology. [. . . ] To switch off, press and hold the answer/end key until the red indicator light is briefly displayed. If the speakerphone is not connected to a paired device within about 5 minutes, it switches off automatically to save power. Pair with another device 1. Ensure that your mobile device is switched on. ENGLISH make the connection separately after pairing. If pairing succeeds, the speakerphone is shown in the list of currently paired Bluetooth devices in your mobile device. When the speakerphone is connected to your mobile device and is ready for use, the green indicator light is continuously displayed. You can pair the speakerphone with up to eight devices but connect it to only one device at a time. When you switch on the speakerphone, it tries to connect to the device that was first paired with it. If the connection fails, the speakerphone tries to connect to one of the other paired devices. To reconnect the speakerphone when it is on but not connected to a device, ensure that the other device is on, and press the answer/end key; or make the connection in the Bluetooth menu of your device. You may be able to set your mobile device so that the speakerphone connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. Installation in a car You can attach the speakerphone to the sunvisor of your car using the supplied clip. General safety instructions When you install the speakerphone in a car, ensure that it does not interfere with or hinder the systems used in the ENGLISH operation of the vehicle (for example, airbags) or disturb your field of vision while driving. Check that the deployment of the airbags is not blocked or impaired in any way. Only operate the speakerphone if it is safe to do so under all driving conditions. To use the speakerphone when it is attached to the sunvisor, ensure that the sunvisor is up at the car roof (8). To detach the speakerphone, turn it counterclockwise, and pull it away from the clip. Attach the clip to the sunvisor To attach the clip to the sunvisor, slide the clip (and the speakerphone attached to it) around the sunvisor from the driver's or passenger's side. Push the clip towards the sunvisor (11), and pull the strap attached to the clip (12 and 13). Firmly press the hook Attach the speakerphone to the and loop end of the strap against the clip felt on the strap (14) to keep the speakerphone securely in place. Fold To attach the speakerphone to the clip, turn the speakerphone sideways, the sunvisor up against the car roof push it towards the clip (9), and turn it (15). Check that the speakerphone is clockwise (10) until it locks into place. in the correct position (16). Basic use Adjust volume To adjust the speakerphone volume during a call, use the volume keys. ENGLISH progress, and proceed as described in the user guide of your device. When you receive a call, you hear a ringing tone Calls To make a call, use your mobile device through the speakerphone. Speak towards the speakerphone To switch an active call from the microphone. [. . . ] More detailed information is available from the product retailer, local waste authorities, national producer responsibility organizations, or your local Nokia representative. For the product Eco-Declaration or instructions for returning your obsolete product, go to country-specific information at www. nokia. com. ENGLISH Additional safety information Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. [. . . ]