User manual OLYMPUS T-10

[. . . ] DIGITAL CAMERA T-10 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. We recommend that you take test shots to get accustomed to your camera before taking important photographs. In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. [. . . ] This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Card/Internal memory "An error message is displayed". 51) Date and time function "Date and time settings return to the default setting". If the batteries are removed and left out of the camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. 17) Shutter button "No picture is taken when the shutter button is pressed". To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. 50 EN Miscellaneous "The camera makes a noise when taking pictures". The camera may activate the lens and make a noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot. Error message Corrective action Internal memory/Card problem Take pictures before viewing them. NO PICTURE Error message When one of the messages below is displayed on the monitor, check the corrective action. Error message Corrective action Card problem Insert a new card. Problem with selected image Use photo retouch software, etc. PICTURE ERROR If the image still cannot be viewed, the image file is corrupted. to edit the image on a computer. THE IMAGE CANNOT BE EDITED CARD ERROR Card problem The card write-protect switch is set to the "LOCK" side. · Erase unwanted images. *1 Card problem · Replace the card. · Erase unwanted images. *1 Card problem Use FG to select [FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory problem Use FG to select [MEMORY FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Battery problem · Insert new batteries. · If using rechargeable batteries, BATTERY EMPTY charge the batteries. Connection problem Connect the camera and computer NO CONNECTION or printer correctly. Printer problem Return to the status where the printer can be used. MEMORY FULL NO PAPER CARD FULL CARD SETUP NO INK POWER OFF FORMAT SET OK JAMMED SETTINGS CHANGED*3 MEMORY SETUP POWER OFF MEMORY FORMAT SET OK EN 51 Error message Corrective action Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again. Problem with selected image Use a computer to print. Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. PRINT ERROR Focusing "Focusing on the subject" Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. 34) The camera tracks the subject movement automatically to focus on it continuously. [. . . ] 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product. 3 This warranty does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the one year period referred to above. a. Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc. ) b. performed by anyone other than Olympus or an Olympus authorized service station. [. . . ]