User manual OMNICRON ELECTRONICS DIGITAL RECORDER ACCESSORIES

[. . . ] Voice Logging Recorders and accessories have been our specialty since 1975. TSA-3LM The easiest way to monitor conversations on individual telephones. The TSA-3LM is used to provide a simple method of connecting supervisory monitoring equipment to telephone handset or headset audio. It can be used with most telephone styles that have a standard modular handset or headset jack. [. . . ] It is used to extend a phone jack or connection. T25-EXT Two-way radio adapter with a relay that switches between receive and transmit audio. Similar to RSA-M3 (above), the RSA-M4 has a relay that connects to 12vDC transmitter power and an audio transformer to boost the volume of transmitter audio that is fed to the recorder. The relay is used to switch its RJ-11 audio output jack from receive audio to transmit audio whenever the radio is transmitting. Installation by a radio service technician is required. RSA-M4 RJ14-S Two line cable assembly. The RJ14-S is used to separate two line RJ-14 phone jacks (L1+L2) into individual RJ-11 jacks or plugs. It can also be used to combine two phone lines from two separate RJ-11 jacks or cables onto a single RJ-14 plug. Telephone supervisory adapter with switch. The TSA-SLM provides all of the functions and features of the TSA-3LM with the addition of an ON/OFF switch that is used to disconnect the telephone audio from your recorder when you do not want your conversation recorded. The TSA-SLM has a 25' output cable that can be extended with the T25-EXT. TSA-SLM Telephone line switch box. With its ON/OFF switch in the OFF position, the output RJ-11 jack is disconnected from the input RJ-11 jack. OVER TSB-6 Digital Recorder Accessories (continued) Digital Recorders from Omnicron come with cables and accessories suitable for most installations. The items on this page are for unusual applications that require different adapters or cables. Converts modular phone cable to mini-plug. The MOD-SC is used when you have a cable with a standard RJ-11 single-line telephone type plug that you need to connect to equipment with a 3. 5mm miniplug jack. It has an RJ-11 jack on one end and a 3. 5mm mini-plug on the other end. The MOD-SC is typically used to connect cables provided with digital recorders such as our Total Recall and TeleCorder, to the audio output of a radio receiver. MOD-SC Telephone handset adapter with DTMF encoder. Similar to other logger patches that connect in series with the handset or headset cord of a digital phone, the TC-100P provides audio output for recording. It also provides a touch tone keypad to send DTMF digits to your recorder, along with the conversations, and an amplifier to boost weak audio. With the TC-100P connected to your digital phone, the recorder will detect any numbers you enter on its keypad during a recording and display them just as if you were using an analog phone. [. . . ] Includes AC power adapter. RSA-2A1 TSA-MRS Telephone handset supervisory adapter -- with proximity switch audio muting. The TSA-MRS has a small proximity sensing magnetic reed switch that is used to mute handset audio when a small magnet (mounts on the handset of your phone) is within 1/2" of the sensing switch that mounts on your phone. Used in rare cases where handset audio is not muted when your phone is hung-up and the standard TSA-3LM cannot be used satisfactorily. Contact your Omnicron representative for assistance in selecting the proper cables or adapters for your application. [. . . ]