User manual OMNICRON ELECTRONICS TOTAL RECALL-HARD DRIVE TESTING, RELOADING, AND COPYING

[. . . ] Testing & Reloading Software To Hard Disk Drive (These instructions may also be used to create a new or spare hard drive for Total Recall. ) Technical Support Vo i ce Lo gge r & Re co r d e r Test if Total Recall program is functioning Internal Install of Total Recall Software Reloading a Total Recall Hard Disk Drive Configuring and Installing HDD Changing the Batch File Partition a Faulty / New HDD with FDISK Format the HDD Copy Files to HDD Testing & Reloading Software To Hard Disk Drive V2. 20 Rev0. 1 10 June 2002 Page 1 1. Testing & Reloading Total Recall Hard Disk Drive 1. 1. Test if Total Recall program is functioning. 1. 5. Unplug HDD and connect as a Primary Master drive in a PC, with NO other HDD connected. [. . . ] You will need to shut down TR but not OS/2, a batch file will need to be modified. From the TR screen press press Esc) <Alt> (&) <Esc> together (press the Alt key first and hold it then 1. 3. 2. Changing the Batch File. The OS/2 "Start Group" Menu will open. Arrow down to "DOS Session" and then press At the C:\] prompt type edit totrec\trecall. bat then press <Enter> <Enter> trecall. bat will open in the Editor screen. Arrow down to last line and add REM as the first word Press <Alt> <Enter> <S> (save) rem runos2 shutdown Press <Alt> <Enter> <X> (exit) This will take you back to C:\ ] prompt. Type EXIT then press <Enter> V2. 20 Rev0. 1 10 June 2002 Page 5 This will take you back to the OS/2 "Start Group" Right Arrow across and then down to "Total Recall Session (DOS)" Press <Enter> At TR screen press <Esc> key to shut down TR This will take you back to OS/2 "Start Group" Right arrow across to the "Running Group" Select startup. cmd then press Press <Ctrl> (&) <C> <Enter> together <Enter> Type EXIT then press 1. 3. 3. Partition the Faulty / New HDD with FDISK Select OS/2 session press Now repartition the faulty/new HDD <Enter> A new HDD will only have one partition and will not require the partitions to be deleted. At the C:\] prompt type FDISK then press <Enter> FDISK window will open. The name DISK at the top left will be highlighted Press the <Tab> Key to DISK Right arrow key to disk 2 then press the This will highlight the first partition of Disk 2, Press <Enter> <Tab> Key This will open an options menu Arrow down to "Delete Partition" then press Arrow down to second partition then press The Options menu will open. Arrow down to "Dele te Partition" then press This will set the disk to one partition Press <Enter> <Enter> <Enter> <Enter> The options menu will open. Arrow down to "Create Partition" The size of partition dialogue box will open. V2. 20 Rev0. 1 10 June 2002 Page 6 Type the size for the first partition as "1945" megabytes then press The "Type of Partition" dialog box will open Select "Primary Partition" then press Then the "Location of partition" dialog box will open Select "Create at start of free space" then press This will take you back to FDISK, <Enter> <Enter> <Enter> <Enter> Arrow down to the second row "Freespace" then press The options menu will open. Arrow down to "Create Partition" The size of partition dialogue box will open. Type the size for the second partition as "6110" megabytes then press The "Type of Partition" dialog box will open Select "Extended Logical Drive" then press <Enter> <Enter> This step may be required if the size of the HDD exceeds 8gb Then the "Location of partition" dialog box will open Select "Create at start of free space" then press<Enter> This may leave some freespace at the end of the drive. At the FDISK screen Press <F3> the exit FDISK options box will open Disc 2 partitions are identified as D: and F: Select "Save and exit" by pressing <F3> again. <Crtl> <Alt> <Delete> (together) Then you will be asked to restart your PC by pressing Total Recall will restart. Press <Esc> key to close TR 1. 3. 4. Format the HDD At the OS/2 "Start Group" menu Right arrow across to the "Running Group" select CMD. EXE press <Enter> V2. 20 Rev0. 1 10 June 2002 Page 7 Type <Ctrl> <C> together Type EXIT then press <Enter> Select OS/2 Session then press At the C:\] prompt type <Enter> then press <Enter> Type FORMAT D: /FS:HPFS You will be prompted to proceed Y/N Type <Y> then press <Enter> The first partition will be formatted, you will then be asked for a label name type Type OS2 then press <Enter> Then format the second partition. At the C:\] prompt type Type FORMAT F: /FS:HPFS then press <Enter> You will be prompted to proceed Y/N type Type <Y> then press <Enter> The second partition will be formatted, you will then be asked for a label name type Type DATA then press <Enter> Change to F: partition and make a directory called "Calls". [. . . ] When Total Recall has started Press <Esc> This should shut down Total Recall and OS/2. There will be a message in the top left corner of the screen "WERE GOING DOWN" "SWITCH OFF" Switch off the PC and remove the HDD. V2. 20 Rev0. 1 10 June 2002 Page 10 [. . . ]