User manual ONE FOR ALL URC 3410

[. . . ] If available on your original remote, these keys will allow you to navigate through the menu. COM 4 705010_4515_E-10:ecoline 1_Rubber zonder grieks 13-03-2007 00:49 8 MUTE Key The Mute key operates the same function it did on your orginal remote control. Also, if your original remote control required that you press an “OK” or “ENTER” key during Menu operation, the Mute key can be used for this function. Volume +/- Keys These keys operate in the same way as the keys on your original remote. [. . . ] Teletext and Fastext Keys The text keys are used to access the Teletext functions of your television. On some televisions, this may be done by pressing the TEXT ON key several times. By pressing again, you can see the bottom half of the Teletext page enlarged. To return to regular Teletext viewing, press the EXPAND key again, or press the TEXT ON key, depending on your television. 9 10 After accessing the text mode, the bottom row of the keys marked red, green, yellow and blue, allow you to access the Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model. COM 5 705010_4515_E-10:ecoline 1_Rubber zonder grieks 13-03-2007 00:49 Setting up the ONE FOR ALL Before you start, please read these instructions carefully Direct code set up To set up the ONE FOR ALL for your television: 1 Acura al Admir n Adyso Agazi AGB Agef Aiko ALL FOR ONE 3, 041 0009 0093, 036 0087, 0216 0217, 0264 0516 7, 0 0087 0009, 003 0216, 0274 1, 0037, 0208, 037 0361, Find the code for your device in the Code list (page 73 - 81). Remember to keep pointing the ONE FOR ALL at your Television while pressing this key. Important note: - Most TV’s do not switch on pressing the POWER key. Please try pressing a “number” key or the “TV-text off” key to switch your TV back on. 2 3 5 8 4 5 6 0 SLOW REC 7 Once you have Set-Up your ONE FOR ALL, you can blink back your SET-UP CODE for future reference. Press and hold MAGIC until the red light blinks twice (The red light will blink once and then twice). For the first digit of your four-digit code, press 1 and count all the red blinks. COM 7 705010_4515_E-10:ecoline 1_Rubber zonder grieks 13-03-2007 00:49 Quick Code Reference Write down the code for your device in the boxes below and in the battery compartment for quick and easy reference. Problem & Solution Problem: Your brand is not listed in the code section?Try repeating the Direct Set-Up using another code listed under your brand or start the search method over again to locate the proper code. Enter the programme number exactly as you would on your original remote. [. . . ] Enter the programme number exactly as you would on your original remote. Make sure you are using new batteries and are aiming the one for all at your device. Replace batteries with 2 fresh, new “AA” alkaline batteries. COM 705010_4515_E-10:ecoline 1_Rubber zonder grieks 13-03-2007 00:49 Trouble Shooting Customer Service If you still have questions about the operation of your ONE FOR ALL 1 universal remote and could not find the answer(s) in the TroubleShooting section, you may want to contact the customer service department for assistance. [. . . ]