User manual ONKYO ABX-100

[. . . ] Dock Music System Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . En-2 ABX-100 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . En-7 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . En-8 Playing Your iPod/iPhone . . . . . . En-9 Setting the Clock. . . . . . . . . . . . . . . . . . . . . Please read this manual thoroughly before making any connections and plugging it in. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Dock Music System. Please retain this manual for future reference. Using the Timers . . . . . . . . . . . . . . . . . . . . . [. . . ] The original display will reappear. Muting the ABX-100 (remote controller only) To mute the ABX-100, press the remote controller’s [MUTING] button. Tips: While the ABX-100 is muted: • Press the VOL []/[] buttons on the ABX-100 or pressing the VOLUME []/[] buttons on the remote controller will unmute the ABX-100. • If you turn the ABX-100 off, the next time you turn it on, the ABX-100 will be unmuted. Note: • If you press no buttons for eight seconds, the previous display will appear automatically. En-8 Basic Operation—Continued Using Super Bass (remote controller only) To turn on Super Bass, press the [S. BASS] button. The strength of the ultra-low range will change each time you press the [S. BASS] button. The “S. BASS” indication will disappear when this setting is off. on off S. BASS Clock Sapaaaaaa 123456789123456 Playing Your iPod/iPhone DISPLAY MENU Q/R ENTER F/H PLAYLIST F/H MENU ENTER F/H U/I VOL H/F U/I VOLUME F/H SHUFFLE REPEAT Notes: • Before using your iPod/iPhone with the ABX-100, be sure to update your iPod/iPhone with the latest software, available from the Apple website. • If you leave your iPod/iPhone paused when using it on its own, eventually it will go into hibernation. If you insert it into the ABX-100 dock in this state, you’ll need to wait a few moments before your iPod/iPhone is ready for use. • Depending on your iPod/iPhone, or the type of content being played, some functions may not work as expected. 1 2 Move the slide cover to the left. Insert your iPod/iPhone into the ABX-100’s iPod dock. Notes: • To prevent damage to the dock connector, do not twist or force your iPod/iPhone into the dock, and be careful not to wiggle your iPod/iPhone while inserting it. • If you use a case with your iPod/iPhone, always remove it before you insert it. • Do not close the slider cover while an iPod/iPhone is inserted. We recommend that you leave the slide cover closed when not using the ABX-100. • Do not use with any iPod/iPhone accessories, such as FM transmitters and microphones, as they may cause a malfunction. En-9 Playing Your iPod/iPhone—Continued Press the Play/Pause [/] button. Note: • The volume level is adjusted by using the VOL []/ [] buttons on the ABX-100 or its remote controller. Adjusting the volume on your iPod/iPhone has no effect. 3 Random Playback (remote controller only) With random playback, the songs on the iPod/iPhone are played in random order. 1 2 Press the [SHUFFLE] button. To start random playback, press the Play [/] button. Pausing Playback To pause playback, press the [/] button. Selecting Songs (remote controller only) To return to the beginning of the track that’s currently playing or paused, press the Previous []button. Fast Forward and Fast Reverse (remote controller only) To fast forward or fast reverse during playback or while playback is paused, press and hold down the Next [] or Previous [] button, respectively. Cancelling Random Playback To cancel random playback, press the [SHUFFLE] button. The  symbol will disappear from the screen of the iPod/iPhone. Repeat Playback (remote controller only) If you press the [REPEAT] button, the song on the iPod/ iPhone will play repeatedly. The type of repeat playback will change as follows each time you press the [REPEAT] button.  : Repeat one song  : Repeat all songs Cancelling Repeat Playback Press the [REPEAT] button several times until the  or  symbol disappears from the screen of the iPod/ iPhone. Navigating the iPod/iPhone Menus 1 2 Press the [MENU] button on the ABX-100 or the remote controller to display the menu on the iPod/iPhone. Use the []/[] buttons to select an item on the menu, and then press [ENTER]. Displaying Song Information (remote controller only) You can display various information about the songs currently playing. [. . . ] • Unplug the AC adapter from the wall outlet, wait 10 seconds or more, then plug it in again. The sound quality is not good. • The sound quality can be affected by strong magnetic fields, such as that from a TV. • If you have any devices that emit high-intensity radio waves near the ABX-100, such as a cellular phone that’s being used to make a call, the ABX-100 may output noise. The ABX-100 turns off unexpectedly. • If the sleep timer has been set and the SLEEP indicator is shown on the display, the ABX-100 will turn off automatically after a specified period (see page 13). • When timed playback finishes, the ABX-100 automatically switches to Standby mode (see page 12). Audio output is intermittent when the ABX-100 is subjected to vibration. The ABX-100 is not a portable device. Use it in a location that’s not subject to shock or vibration. En-14 Troubleshooting—Continued iPod/iPhone There’s no sound. • Make sure your iPod/iPhone is properly seated in the ABX-100’s iPod dock. [. . . ]