User manual ONKYO A-1E

[. . . ] AS-1E ­Assembly Instruction Manual­ Thank you for purchasing an Onkyo product! · This instruction manual describes how to assemble and use the speaker stand and provides precautionary information. [. . . ] · Before starting assembly, make sure that you have all the parts by referred to in the parts list and assembly diagram. · Be careful not to scratch the speaker when you install the speaker on the speaker stand. Package contents · Spike · Screws for additional top panel · Speaker affixing screw · Teflon washer Finished assembly * This illustration shows a single unit. Dimensions 4-15/16" 23" 11-5/16" 22" 16-1/4" Product weight: 15. 9 lbs (per unit) Static live load capacity: 44 lbs or less; * Do not exceed this limit. En Assembling the speaker stand Attach the additional top panel to the original top panel by inserting and tightening the additional top panel screws in the appropriate screw holes in accordance with the size of the speaker. Use the speaker affixing screws and teflon washers to install and secure the speaker to the stand, as shown in the illustration. Maintenance To keep the stand clean, occasionally wipe off dust using a soft dry cloth. To remove dirt, dilute a neutral detergent (e. g. , a 6-to-1 water/detergent solution). Lightly dampen a cloth using the diluted detergent solution, then wipe off the dirt. Then, wipe off any detergent from the surface using a water-soaked cloth. [. . . ] However, be aware that spikes may leave scratches or traces on a wooden floor. SN 29344352 (C) Copyright 2006 ONKYO CORPORATION Japan. [. . . ]