User manual ONKYO C-7030

[. . . ] COMPACT DISC PLAYER Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . En-2 C-7030 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Please read this manual carefully before making any connections or using this product. By following these instructions, you’ll get the best audio performance and the most listening pleasure from your Onkyo product. Keep this manual for future reference. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not use cleaning spray for analog records or antistatic agents, etc. Never use volatile chemicals such as benzine or paint thinner as they can impregnate the disc surface. En-12 Connecting the CD Player Audio Connections • Before making any connections, read the manuals supplied with your other components. • Don’t connect the power cord until you’ve completed and double-checked all connections. Optical/Coaxial Digital Jack The unit supports 16 bit, 44. 1 kHz PCM signal digital output. The C-7030’s optical digital jack has a shutter-type cover that opens when an optical plug is inserted and closes when it’s removed. Caution: To avoid damaging the shutter, hold the optical plug straight when inserting and removing. Note: Do not put anything on top of the C-7030, as it may interfere with proper ventilation. Connection Color Coding RCA-type audio connections are usually color-coded: red and white. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). Analog audio cable Left (white) Right (red) Left (white) Right (red) Right! • Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions). • To prevent interference, keep audio cables away from power cords and speaker cables. Wrong! Disconnect the power cord before making any connections! RCA/phono audio cable (supplied) Optical digital cable (not supplied) Connect one or the other Coaxial cable Coaxial cable (not supplied) (not supplied) Coaxial IN Optical digital cable (not supplied) CD Optical IN Coaxial IN Hi-fi amp, AV receiver Connect one or the other Optical IN CD-R, MiniDisc, DAT recorder En-13 Connecting the CD Player—Continued Connections With  (Remote Interactive) you can control the C-7030 together with your other -compatible Onkyo AV components. With some Onkyo AV receivers you can use one remote controller to control all your Onkyo components and use the following special  functions: Direct Change If your C-7030 is connected to an -compatible Onkyo hi-fi amp or AV receiver, when you start playback on the C-7030, the AV receiver will select the C-7030 as the input source. Remote Control Operation You can control the C-7030 by using your Onkyo amplifier’s remote controller. To use the  functions, you need to connect one of the C-7030’s connectors to an connector on another AV component in your system by using the supplied  cable. See the manuals supplied with your other -compatible AV components for more information. The other connector is for connecting additional -compatible components. • Connect the C-7030’s connector only to Onkyo AV components. Connecting to other manufacturer’s AV components may cause them to malfunction. • Some Onkyo -compatible AV components may not support the special functions described here.  (RCA/phono) between the C-7030 and your other Onkyo component even if they are connected digitally. To use  you must make an analog audio connection Disconnect the power cord before making any connections! Coaxial cable (not supplied)  cable (supplied) RCA/phono audio cable (supplied) L R CD  Coaxial IN Onkyo Hi-fi amp, AV receiver En-14 Connecting the Power Cord Before connecting the power cord, connect all of the other components. Plug the power cord into a suitable electrical outlet Basic Operation Turning On CD Player ON/STANDBY 2 3 DIMMER DISPLAY Use the [] or [] button to display “ASb”; then press the [ ENTER ] button. Use the [] or [] button to switch “Off” or “On”; then press the [ ENTER ] button. “COMPLETE” appears on the display. 4 Note: If playback is paused, the power will remain on even after 30 minutes have elapsed; the Auto Standby function will not operate. To turn on the CD Player, press the [ ON/STANDBY] button on the unit or the remote controller. Press the [ ON/STANDBY] button again to set the CD Player to Standby. Changing the Display Brightness Press the remote controller’s [DIMMER] button repeatedly to select the following options: Normal Dim DIMMER Setting Auto Standby (ASb) Dimmer ENTER ENTER Using Headphones   You can specify that if the CD Player is left stopped for 30 minutes, the power will automatically turn off, placing the unit in Standby mode (Auto Standby function). On the North American model: The default setting is “Off”. Make settings for this function while playback is stopped. Turn down the volume, then connect your stereo headphones to the [PHONES] jack. [. . . ] To reset the CD Player to its factory defaults, turn it on and, while holding down the [] button, press the [] button. Note that resetting the CD Player will delete your custom settings. Power Can’t turn on the C-7030. • Make sure that the power cord is properly plugged into the wall outlet (page 15). • Unplug the power cord from the wall outlet, wait five seconds or more, then plug it in again. Audio There’s no sound. • The C-7030 is not connected properly. [. . . ]