User manual ONKYO CR-315

[. . . ] 2 CR-515 CR-315 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . Please read this manual thoroughly before making any connections and plugging it in. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver. Please retain this manual for future reference. Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the Direct function is on, the tone controls are bypassed, so you can enjoy a pure sound, and the DIRECT indicator lights up. DIRECT indicator 1 Press the [TONE] button to select Bass. 2 Use the Previous and Next [ ]/[ ] buttons to adjust the bass. The default setting is "±0. " You can adjust the bass and treble from ­3 to +3. Press [ENTER], and then use the Previous and Next [ ]/[ ] buttons to adjust the treble. Notes: · If you press no buttons for 8 seconds, the previous display will appear automatically. · If you press the [TONE] button while the Direct function is on, the Direct function will be turned off. On the remote controller, press the [TONE] button for 3 seconds to turn on the Direct function. On the CR-515, the [DIRECT] button's indicator lights up when the Direct function is on. Muting the Sound To mute the output of the CD receiver, press the remote controller's [MUTING] button. On the CR-515, the volume control indicator flashes, too. MUTING indicator On the CR-515, you can also use the [TONE] button and multi control on the front panel to adjust the bass and treble. Using the Super Bass Function To turn on the Super Bass function, press the [S. BASS] button. Press the [TONE] button for 3 seconds to turn on the Super Bass function. Note: If you press the [S. BASS] button while the Direct function is on, the Direct function will be turned off. To unmute the CD receiver, press the [MUTING] button again. Tips: While the CD receiver is muted: · Turning the [VOLUME] control on the CD receiver or pressing the VOLUME [ ]/[ ] buttons on the remote controller will unmute the CD receiver. · If you turn the CD receiver off, the next time you turn it on, the CD receiver will be unmuted. 28 Basic Operation--Continued Changing the Input Display You can choose what name is displayed when an input source is selected so that it matches the type of component that you've connected to the MD/TAPE IN, DOCK/CDR IN, or DIGITAL IN. When you connect an Onkyo -capable component, it's important that you select the input source name that matches the type of component for to work properly. Depending on the input source selected in step 1, the input source names are selected in the following orders: INPUT / MENU/NO/ CLEAR / YES/MODE ENTER DIGITAL GAME/dig DOCK PC CD-R/dig PC/dig TAPE MD DAT CD-R VIDEO 1 Use the INPUT [ ]/[ ] buttons to select the input source whose name you want to change. CR-515: TAPE, DOCK, DIGITAL* (*Asian model only) 4 Press [ENTER] to confirm your selection. CR-315: TAPE "Complete" appears on the display. 2 Press and hold the [MENU/NO/CLEAR] button until "Name Select?" flashes on the display, and then press [ENTER]. On the CR-515, you can also use the front panel controls. 1 Use the [INPUT] button to select the input source whose name you want to change. 2 Push the multi control to select "Name Select?, " and then push it again. 4 Push the multi control to confirm your selection. 3 Use the Previous or Next [ ]/[ ] button to select the new input source name. Input Source Name Abbreviations Sometimes the input source name may be displayed as a 2-letter abbreviation, as per the following table. Full name CDR DAT DIGITAL GAME DOCK LINE LINE1 LINE2 MD PC TAPE VIDEO Abbreviation CR DT DG GM DC LI L1 L2 MD PC TP VD 29 Playing CDs CR-515 Display CR-315 Display Disc tray / Disc tray / 1 Press the Eject [ ] button to open the disc tray. Tip: Pressing the Eject [ ] button while the CD receiver is on Standby will turn on the CD receiver and open the disc tray. To remove the CD: Press the Eject [ ] button to open the disc tray. "DISC TOTAL" lights up while the disc information is being displayed. Selecting Tracks (CR-515) To return to the beginning of the track currently playing, turn the multi control a little to the left. · While playback is stopped, turn the multi control to the left to select the previous track. · On MP3 CDs, you can select MP3 files in other folders (see page 32). 2 3 Selecting Tracks (CR-315) To return to the beginning of the track currently playing, press the Previous [ ] button. · While playback is stopped, pressing the Previous [ ] button will select the previous track. [. . . ] Set the clock and timers again (see pages 47, 48). Can't adjust the frequency of the radio. · Use the Fast Reverse and Fast Forward [ RDS doesn't work. ]/[ ] buttons to change the frequency of the radio (see page 39). · · · · The FM station you are tuned to doesn't support RDS. Change the position or direction of your outdoor FM antenna (see pages 17, 39). Move the FM antenna as far away as possible from fluorescent lights (see page 39). Remote Controller The remote controller doesn't work properly. · · · · · Make sure the batteries have been installed with the correct polarity (+/­) (see page 5). [. . . ]