User manual ONKYO CR-505

[. . . ] Contents CD Receiver Introduction 2 CR-505 Instruction Manual Connections 11 Getting Started 16 CD/MP3 Playback 20 Radio 24 Using Other Functions Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver. Please retain this manual for future reference. 27 Appendix 31 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Notes: · If the clock has not been set correctly, specify another FM station and try again, or set the clock manually (see page 18). · If you don't want the clock to be calibrated automatically, you can turn off the ACCUCLOCK function (see the next section). 17 Powering Up and Setting the Clock--Continued 4 Press the [ENTER] button. The time flashes. STANDBY/ ON CLOCK CALL CLOCK CALL TIMER 1 4 2 5 8 --/--- 3 TIMER 6 9 5 Use the Up/Down [ the time. ]/[ ] buttons to set 7 10/0 CLEAR ENTER DISPLAY MODE ENTER SLEEP REPEAT MUTING INPUT DIRECT 6 Press the [ENTER] button to set the clock. "ADJUSTED" appears on the display. CD MD Setting the Clock Manually For European models: If you cannot set the clock by using the ACCUCLOCK function, you can set it manually. In this case, the ACCUCLOCK function will not automatically calibrate the clock each day. Displaying the Date & Time 1 Press the [CLOCK CALL] button. The date and time appear on the display. Press the [CLOCK CALL] button again to return to the previous display. VOLUME 1 Press the [TIMER] button repeatedly until "CLOCK" appears. MIN STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET MAX PUSH TO ENTER Only for European models: Press the [ENTER] button and use the Up/Down [ ]/ [ ] buttons to select "MANUAL ADJ. " STANDBY/ON Displaying the Time in Standby Mode You can set the CR-505 so that the time is displayed while the CR-505 is in Standby mode. 2 Press the [ENTER] button. The day of the week flashes. 1 With the CR-505 turned on, press and hold the CR-505's [STANDBY/ON] button for more than 2 seconds. To turn off the time display, repeat this procedure. Note: Setting the CR-505 to display the time will slightly increase the power consumption in Standby mode. 3 Use the Up/Down [ a day. ]/[ ] buttons to select 18 Using the CR-505 VOLUME control VOLUME Adjusting the Volume 1 To adjust the volume, use the [VOLUME] control, or the remote controller's VOLUME [ ]/[ ] buttons. MAX MIN STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET Turn the [VOLUME] control clockwise to increase the volume; counterclockwise to decrease it. PUSH TO ENTER Using Headphones INPUT You can connect a pair of stereo headphones to the CR505's PHONES jack for private listening, as shown. STANDBY/ ON CLOCK CALL 1 4 2 5 8 --/--- 3 TIMER 6 9 7 10/0 CLEAR ENTER DISPLAY MODE SLEEP REPEAT VOLUME UP STANDBY / ON PHONES INPUT MENU INPUT / MUTING INPUT VOLUME DIRECT CD DOWN MD TAPE Note: Always turn down the volume before connecting your headphones. RC-580S Selecting Sound Sources 1 Use the [INPUT] button, or the remote controller's INPUT [ ]/[ ] buttons to select one of the following sound sources: CD, FM or AM, TAPE, MD, LINE. The currently selected source is shown on the display. 2 If you selected CD, see "Playing CDs" on page 20. If you selected AM or FM, see "Using the Radio" on page 24. If you selected TAPE, MD, or LINE, start playback on the relevant component. 19 Playing CDs I To Fast Forward or Fast Reverse (remote controller only) VOLUME MIN STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET MAX PUSH TO ENTER During playback or while playback is paused, press and hold the [ ] button to fast forward, or the [ ] button to fast reverse. For MP3, fast reverse only works within the MP3 track that is currently playing. If you press the button for more than four seconds, the fast forward or fast reverse speed increases. / Stop Play/ CLOCK CALL I To Select Tracks Pause STANDBY/ ON 1 2 5 8 --/--- 3 TIMER Number buttons 4 6 9 7 10/0 CLEAR ENTER DISPLAY MODE --/--REPEAT SLEEP MUTING INPUT CD operation buttons CD MD DIRECT TAPE On the CR-505: Turn the [ / ] control to select a track for playback. If you select a track while playback is stopped, press the [/ ] control to start playback. On the remote controller: Press the [ ] button to select the next track, or the [ ] button to select the previous track. If you press the [ ] button during playback or while playback is paused, the beginning of the current track is selected. If you select a track while playback is stopped, press the Play [ ] button to start playback. Note: With CDs and MP3 discs that contain many tracks, playback may take a while to start. Playing CDs Selecting Tracks by Number You can use the number buttons to select specific tracks. Label side 1 Press the [ ] button to open the disc tray, put the CD on the tray with the label-side facing up, and press the [ ] button again to close the tray. 1 Use the number buttons to enter a track number. Playback starts automatically. For MP3 disc, select the serial number assigned to the track. To enter a track number smaller than or equal to 10, press each number button. To enter a track number greater than or equal to 100, press [--/---] twice. For example, to enter tranck number 123, press [--/---] twice, [1], [2] and [3]. Be sure to put 8 cm discs in the center of the tray. 2 Press the Play [ back. I To Stop Playback ] button to start playindicator appears on the Playback starts and the Play display. · Press the Stop [ ] button. I To Pause Playback · Press the Play/Pause [ / ] button on the CR-505 or Pause [ ] button on the remote controller. · To resume playback, press the Play/Pause [ / ] button on the CR-505 or Play [ ] button on the remote controller. 20 Playing CDs--Continued I MP3 Disc STANDBY/ ON CLOCK CALL 1 4 2 5 8 --/--- 3 TIMER Elapsed track time: The length of time that the current track has been playing (default display). FOLDER MP3 TRACK 6 9 7 10/0 CLEAR ENTER DISPLAY MODE DISPLAY SLEEP REPEAT MUTING INPUT Track name: Name of the current track. MP3 TRACK NAME DIRECT Displaying Information This section explains how to display various information, including the remaining track time, remaining disc time, and ID3 tag for MP3 tracks. Folder name: Name of the current folder. MP3 FOLDER NAME 1 During playback, press the [DISPLAY] button repeatedly to cycle through the following options. I Audio CD Elapsed track time: The length of time that the current track has been playing (default display). CD TRACK Title name: Title of the current track (if ID3 tag present). MP3 NAME Remaining track time: The amount of time remaining for the current track (REMAIN indicator appears). CD TRACK REMAIN Notes: · To display the disc name, while playback is stopped, press the [DISPLAY] button. · If a track or folder name contains a character that cannot be displayed, it will be displayed as "*. " · If the number of folders in a MP3 disc exceeds 99, it will be displayed as "- -. " Remaining disc time: The amount of time remaining for the entire disc (REMAIN and TOTAL indicators appear). CD TRACK TOTAL REMAIN 21 Various Playback VOLUME STANDBY/ ON CLOCK CALL 1 2 5 8 --/--- 3 TIMER Number buttons 4 6 9 MIN MAX 7 10/0 CLEAR ENTER DISPLAY MODE MODE SLEEP REPEAT CLEAR ENTER --/--REPEAT STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET PUSH TO ENTER MENU / Play/ Pause MUTING INPUT Random Playback DIRECT CD MD With the Random function you can play tracks in random order. TAPE 1 While stopped, press the remote controlRC-580S ler's [MODE] button repeatedly to display RANDOM indicator. Repeat Playback With the Repeat function you can play a track, a folder or a disc repeatedly. 2 Press the Play [ playback. ] button to start random All tracks are played in random order. 3 To cancel random playback, stop playback, and then press the [MODE] button repeatedly until the RANDOM indicator disappears. Note: When carrying out operations on the CR-505, press the [MENU] button repeatedly to select the RANDOM mode, and then press the Play/Pause [ / ] button to start random playback. 1 During playback, press the remote controller's [REPEAT] button repeatedly to select repeat mode. The REPEAT indicator lights up. [. . . ] Installing an outdoor antenna is a specialist's job, so contact your nearest dealer for advice (page 13). The power cord must be plugged into a wall outlet a few times each month in order to preserve the presets (page 4). Install an outdoor FM antenna (page 13), change the position or direction of your outdoor FM antenna, and keep it away from fluorescent lights. Remove the disc and leave the CR-505 turned on for several hours until the condensation has evaporated. [. . . ]