User manual ONKYO D-035 QUICKSTART GUIDE

[. . . ] If a liquid is spilled over them, the woofer and tweeter inside may be damaged. · Do not handle the speakers with wet or damp hands. Precautions In catalogs and on packaging, the letter at the end of the product name indicates the color. [. . . ] Use both hands to gently pull the top of the grille away from the speaker. To replace the grille, align the four fasteners and gently push the grille toward the speaker. · Before connecting the speakers, disconnect your amplifier's power cord from the wall outlet and set its volume control to minimum. Make sure you connect an amplifier that is compatible with a 4 impedance. · Use the supplied speaker cables to connect the speakers to your amplifier as shown. 1. Peel the insulation off the ends of the speaker cable and twist the core wires. While pressing the lever, insert the wire into the hole, and then release the lever. Make sure that the terminals are gripping the bare wires, not the insulation. Right speaker Positive (+) side is indicated by a red line Left speaker Speaker cable Remove Replace The type of speaker terminals used on the receiver and their position depends on the model. Refer to the receiver's instruction manual for details on connecting speakers to the receiver. 2 Before Turning on Your Receiver: · Make sure the speaker's positive (+) terminals are connected to the amplifier's positive (+) terminals, and the speaker's negative (­) terminals are connected to the amplifier's negative (­) terminals. If you get the polarity reversed, the sound will be unnatural, with a limited bass range and poor stereo image. · Make sure that the positive (+) and negative (­) wires are not touching each other. [. . . ] Angle the speakers toward your listening position. 3 Specifications D-035 Type: Impedance: Maximum input power: Output sound pressure level: Frequency response: Crossover frequency: Cabinet capacity: Dimensions (W × H × D): Weight: Speakers Terminal: Grille: Accessories: Others: 2-way bass reflex 4 40 W 83 dB/W/m 50 Hz­50 kHz 7 kHz 4. 8 137 × 234 × 230 mm (incl. grille and projection) 2. 3 kg Woofer: 10 cm OMF cone type Tweeter: 2. 5 cm Ballanced Dome type Push-type Detachable 1. 8 meter speaker cable × 2 Cork spacer × 8 Magnetic shielding Sales & Product Planning Div. [. . . ]