User manual ONKYO DR-90
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ONKYO DR-90. We hope that this ONKYO DR-90 user guide will be useful to you.
Manual abstract: user guide ONKYO DR-90
Detailed instructions for use are in the User's Guide.
[. . . ] Contents
Before Using Your DVD Receiver 2
DVD Receiver
Getting Started
DR-90
Instruction Manual
Basic Operation
6
20
Advanced DVD/ VIDEO CD/ Audio CD Operation
THIS DVD PLAYER IS MANUFACTURED FOR PLAYBACK O F R E G I O N 1 ( U S A , C A N A DA ) E N C O D E D DV D SOFTWARE. USE OF SOFTWARE NOT INTENDED FOR REGION 1 PLAYBACK MAY RESULT IN UNDESIRABLE PLAYER PERFORMANCE.
33
Thank you for purchasing the ONKYO DVD Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new DVD Receiver. [. . . ] When you press twice, the DVD Receiver starts playback from the beginning of the preceding chapter or track. : To locate succeeding chapters or tracks
Press the number button(s) of the chapter or track you want.
1 2
LEVEL
3 6 9
TEST TONE
4 7 +10
5 8 0
You can use +10 (ten's digit button) to select numbers from 10 through 99.
e. g. To select chapter or track 25 (VIDEO CD/ (DVD video) audio CD) · ·
2 5
Title: 1 25 Chapter :
UP
Track : 2 5
+10
+10
5
Notes
4
PLAY
Press PLAY.
The DVD Receiver starts playback from the selected chapter or track.
· Some title may not display chapter numbers. · When you set "Title Stop" to "Off" (see page 56), you can locate consecutive chapters in another title. If you go back to the preceding title by pressing , the DVD Receiver locates the first chapter of the title. When "Title Stop" is set to "On, " you can locate consecutive chapters only within the current title.
To select a title and chapter number at the same time
ENTER
Press / to highlight the space next to "Title, " and enter the title number using the number buttons.
Note
Pressing CLEAR resets the Title and Chapter numbers. To close the Title/Chapter display, press SEARCH several times.
24
SENDING/ LEARNED
LEVEL SETUP TV DVD RECEIVER
POWER SLEEP ON STANDBY
DIMMER DISPLAY
TITLE
MENU
SURROUND MODE
ENTER
INPUT SELECTOR DVD TV
RETURN
SETUP
VIDEO 1
TAPE
CH SEL
VIDEO 2
TUNER
1
TEST TONE
2
LEVEL
3
AUDIO SUBTITLE
Number buttons SEARCH CLEAR PLAY
4
5
6
ANGLE ZOOM
7
8
9
SEARCH CLEAR OPEN/ CLOSE
+10
FR
0
PAUSE FF
POWER
MUTING
DOWN
PLAY
UP
CHANNEL
TUNER PRESET
TV/ VCR
RANDOM
STOP
SLOW
REPEAT
A-B
MEMORY
VOLUME
REMOTE CONTROLLER
RC-399M
DVD
Locating a specific location by entering the time
You can locate a specific location by entering its corresponding time (hours, minutes, seconds).
VCD CD
1
SEARCH
Press SEARCH twice.
Basic Operation
You may have to press repeatedly (depending on the disc) until the following display appears.
Time - : - - : - -
2
CH SEL
Press the number buttons to enter the location's time.
1 2
LEVEL
3
TEST TONE
e. g.
6 9
1
2
5
3
0
4 7 +10
5 8 0
Hours
Minutes
Seconds
Time 1:25:30
3
PLAY
Press PLAY.
The DVD Receiver starts playback from the entered location.
Notes
· Some discs may not respond to this procedure. · This method for accessing specific locations is available only within the current title of the DVD video or within the current track of the VIDEO CD/audio CD.
25
Listening to the Radio
There are two ways to select radio stations: one is manual tuning and the other is presetting radio stations then selecting the preset channels.
MASTER VOLUME STANDBY/ ON OPEN/CLOSE DOWN UP PAUSE STOP PLAY
UP
MASTER VOLUME STANDBY/ ON OPEN/CLOSE DOWN UP PAUSE STOP PLAY
UP
DO W N
STANDBY
STANDBY Re - EQ VIDEO 1 VIDEO 2
INPUT SELECTOR
POWER
DVD ON OFF TAPE/MD
SURROUND MODE
POWER
VIDEO 1 VIDEO 2
INPUT SELECTOR
Re - EQ DVD
SURROUND MODE
LATE NIGHT AM
ON
OFF TAPE/MD
LATE NIGHT AM
TV
FM
BASS
TREBLE PHONES
SPEAKER SETUP CH LEVEL MODE PRESET / MODE ADJ
TV
FM
DO W N
BASS
TREBLE
PHONES
DISPLAY
SPEAKER SETUP CH LEVEL MODE
PRESET / MODE ADJ
ENTER
TUNING
PRESET MEMORY FM MUTE
DISPLAY
ENTER
TUNING
PRESET MEMORY FM MUTE
2
Tuning Manually
FM MUTE
1
4 3, 5 2
Presetting Radio Stations
· You can preset up to 30 stations. · You can preset radio stations only with the buttons on the DVD Receiver.
You can tune manually only with the buttons on the DVD Receiver.
1
FM
Press FM or AM to select the band.
1 2
Press TUNING frequency. / to change the
PRESET MEMORY
Tune in the radio station you wish to preset (see steps on the left).
Press PRESET MEMORY.
"PRESET IN" appears in the DVD Receiver's display.
AM
2
TUNING
3
· The frequency changes in 50 kHz steps in FM and 10 kHz in AM each time you press TUNING /. · In FM, if this button is held continuously for more than 0. 5 seconds, the frequencies are scanned automaticallyFM auto tuning mode. When a broadcast is received, scanning stops.
ENTER
While "PRESET IN" is lit in the display, press ENTER.
The MEMORY indicator lights up in the display.
4
PRESET / MODE ADJ
While the MEMORY indicator is lit in the display, press PRESET / to select the channel number to which you wish to register the radio station.
Tuning in a weak frequency (only for FM stations)
When you tune in a stereo FM station, the FM STEREO indicator lights up if the signal is sufficiently strong. In this case, tune in as follows.
FM MUTE
5
ENTER
Press ENTER.
The radio station is registered to the preset channel. To register another preset station, repeat steps 1 to 5.
Press FM MUTE.
The FM MUTE indicator turns off. At this time, the station will be in mono and interstation noise will be heard. Select the station to which you want to listen.
26
SENDING/ LEARNED
LEVEL SETUP TV DVD RECEIVER
POWER SLEEP ON STANDBY
DIMMER DISPLAY
TITLE
MENU
SURROUND MODE
ENTER
INPUT SELECTOR DVD TV
RETURN
SETUP
VIDEO 1
TAPE
CH SEL
VIDEO 2
TUNER
1
TEST TONE
2
LEVEL
3
AUDIO SUBTITLE
1
MASTER VOLUME STANDBY/ ON OPEN/CLOSE DOWN UP PAUSE STOP PLAY
U
4
5
6
ANGLE ZOOM
W N
MASTER VOLUME STANDBY/ ON OPEN/CLOSE DOWN UP PAUSE STOP PLAY
7
DO W N
8
9
SEARCH
UP
P
CLEAR
OPEN/ CLOSE
+10
STANDBY
0
STANDBY
POWER
VIDEO 1 ON OFF TAPE/MD VIDEO 2
INPUT SELECTOR
Re - EQ DVD
SURROUND MODE
FR
PAUSE
FF
POWER
MUTING
POWER
VIDEO 1 VIDEO 2
INPUT SELECTOR
Re - EQ DVD
SURROUND MODE
LATE NIGHT AM
DOWN BASS RANDOM
PLAY
UP TREBLE
CHANNEL
TUNER PRESET
TV/ VCR
TV
FM
2
ON
OFF TAPE/MD
LATE NIGHT AM
TV
FM
DO
BASS
TREBLE
PHONES
PHONES
DISPLAY
SPEAKER SETUP CH LEVEL MODE
PRESET / MODE ADJ
ENTER
TUNING
PRESET MEMORY FM MUTE
STOP
SLOW
DISPLAY
SPEAKER SETUP CH LEVEL MODE
PRESET / MODE ADJ
ENTER
TUNING
PRESET MEMORY FM MUTE
REPEAT
A-B
MEMORY
VOLUME
2
1
REMOTE CONTROLLER
RC-399M
3
2
Selecting Preset Stations
Before selecting preset stations, you need to preset the radio stations. See "Presetting Radio Stations" on the previous page.
Erasing a Preset Station
Erasing preset stations can be made only with the buttons on the DVD Receiver.
Selecting with the remote controller
1 2
PRESET MEMORY
Select the preset channel you wish to erase (see steps on the left).
Basic Operation
1 2
TUNER
Press TUNER to switch the input source to the tuner.
"FM" or "AM" appears in the DVD Receiver's display. The band selected in this step will not affect the next step.
Press PRESET MEMORY twice.
"ERASE" appears in the DVD Receiver's display.
CHANNEL TUNER PRESET
Press TUNER PRESET / repeatedly until the desired preset number appears.
Note
The DVD RECEIVER/LEVEL SETUP/TV switch must be set to DVD RECEIVER.
3
ENTER
While "ERASE" is lit in the display, press ENTER.
The selected preset channel will be erased.
Selecting with the DVD Receiver
Various Functions While Listening to Radio Programs
To use the following functions, see page 29. · Adjusting the volume · Adjusting the tone · Dimming the DVD Receiver's display · Listening through headphones · Using the Sleep Timer · Muting the sound
1
FM
Press FM or AM to switch the input source to the tuner.
The band selected in this step will not affect the next step.
AM
2
PRESET / MODE ADJ
Press PRESET / repeatedly until the desired preset number appears.
Enjoying the Sound Effects While Listening to the Radio Programs
See page 30.
27
Playing the Connected Source
This section shows you how to play the sources connected to the DVD Receiver. You may need to see "Connecting to a TV" on page 10 and "Connecting to Audio/Video Equipment" on page 11 while following the steps in this section.
MASTER VOLUME OPEN/CLOSE DOWN UP PAUSE STOP PLAY
UP
SENDING/ LEARNED
LEVEL SETUP TV DVD RECEIVER
POWER SLEEP ON STANDBY
DIMMER DISPLAY
TITLE
MENU
SURROUND MODE
ENTER
INPUT SELECTOR DVD TV
RETURN
SETUP
VIDEO 1
TAPE
1
CH SEL
VIDEO 2
TUNER
1
TEST TONE
2
LEVEL
3
AUDIO SUBTITLE
4
5
6
ANGLE ZOOM
STANDBY/ ON
DO W N
7
8
9
SEARCH CLEAR OPEN/ CLOSE
STANDBY
+10
Re - EQ VIDEO 1 VIDEO 2
INPUT SELECTOR
0
PAUSE FF
POWER
DVD ON OFF TAPE/MD
SURROUND MODE
FR
LATE NIGHT
POWER
MUTING
TV
FM
AM
BASS
TREBLE
DOWN
PLAY
UP
CHANNEL
TUNER PRESET
TV/ VCR
PHONES
DISPLAY
SPEAKER SETUP CH LEVEL MODE
PRESET / MODE ADJ
ENTER
TUNING
PRESET MEMORY FM MUTE
RANDOM
STOP
SLOW
REPEAT
A-B
MEMORY
VOLUME
1
Operating with the remote controller About digital sound
REMOTE CONTROLLER
RC-399M
1
VIDEO 1
TV
Press one of the INPUT SELECTOR buttons below to select the input source:
· TV · TAPE · VIDEO 1 · VIDEO 2
When TV is selected
TAPE
If the equipment is digitally connected to the DVD Receiver, the sound from the digital input will automatically be selected and reproduced instead of the analog sound as explained below. · When the VIDEO 1 source is selected, the digital sound from the DIGITAL INPUT OPTICAL VIDEO 1 connector is reproduced. · When the VIDEO 2 source is selected, the digital sound from the DIGITAL INPUT COAXIAL VIDEO 2 connector is reproduced. [. . . ] · The DVD Receiver is in repeat playback mode, memory playback mode, etc.
9 20 20 20, 9 44, 54
Others
(Continued on next page. )
61
Troubleshooting (continued)
Symptoms Too much noise is heard or sound is interrupted occasionally. ("STEREO" indicator does not light steadily. ) Causes · FM stereo waves may produce a hiss noise when a certain level is reached. (For installation of the outdoor antenna, consult your nearest dealer as it requires special skills and experience. ) Pages 26 29 14 15
Tuner
Sound is distorted or sound volume decreases.
· The radio wave is distorted. · Cars are running or airplanes are flying near the house.
Sound is excessively distorted.
· There is a tall building or a mountain nearby. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ONKYO DR-90
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ONKYO DR-90 will begin.