User manual ONKYO DS-A1X

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. If liquid has been spilled, or objects have fallen into the apparatus, C. If the apparatus does not operate normally by following the operating instructions. [. . . ] (You might need to change the input display to "HDD" or "DOCK. ") B: Connect the RI Dock's AUDIO OUT L/R jacks to the TAPE (MD, CDR) IN jacks on your Onkyo amp. Note: When the AC adapter is unplugged or not connected to the RI Dock, the RI Dock will output no sound or video, functions will not work, and your iPod's battery will not be charged. Do not connect headphones to the jack, as it will damage your equipment. If you've connected the RI Dock's AUDIO OUT L/R jacks to your amp's TAPE (MD, CDR) IN jacks and also want to connect the RI Dock's VIDEO OUT jack to your amp Connect the RI Dock's VIDEO OUT jack to an unused video input on your amp. When you want to watch an iPod slideshow or video, select the video input source first, and then select the TAPE (MD, CDR) input source. Your AV receiver will output the audio being fed to the TAPE (MD, CDR) input, and because the video source doesn't change when the TAPE input source is selected, it'll continue to output the video being fed to the video input. What to do if you already have a component connected to your amp's TAPE input or RI Dock-compatible input Connect the RI Dock to an unused AV input on your amp. However, you will not be able to use any of the functions. AC adapter 5 Yellow Supplied cable White Red AUDIO INPUT L R VIDEO INPUT White Red Wall outlet Supplied AV cable VIDEO INPUT Yellow Yellow -capable amp or TV 1. Using the supplied AV cable, connect the RI Dock's AUDIO OUT L/R jacks to a suitable audio input on your amp. And connect the RI Dock's VIDEO OUT jack to a video input on your Onkyo AV receiver (A) or TV (B). Using the supplied cable, connect the RI Dock's jack to an jack on one of the Onkyo components in your system. Connect the supplied AC adapter to the RI Dock's DC IN jack. 6 Using the RI Dock Putting Your iPod in the RI Dock 1. Align your iPod with the RI Dock's iPod slot, and carefully place your iPod in the slot, as shown. Function Overview Basic Operation Note: · Your amp may take several seconds to startup, so you might not hear the first few seconds of the first song. · System On Function When you turn on your amp, the iPod turns on as well. With some amps, you may need to press the [ON] button on your amp's remote controller's twice to turn on the other components in your system. · System Off Function When you turn off your amp, the iPod turns off as well. · If your amp doesn't support the System On, System Off, Auto Power On, and Direct Change functions, you'll need to turn your amp on and off and select the input source manually. · Before you select another input source, stop iPod playback to prevent your amp from selecting the iPod input source by mistake. · If any accessories are connected to your iPod, your amp may not be able to select the input source properly. · While your iPod is in the RI Dock, its volume control has no effect. If you adjust your iPod's volume control while it's in the RI Dock, make sure it's not set too high before you reconnect your headphones. Using Your iPod's Alarm Clock You can use your iPod's Alarm Clock function to automatically turn on your iPod and amp at a specified time. Your amp's input source will automatically be set to the input to which your iPod is connected. [. . . ] (220 g) 4-7/16 x 2-3/8 x 4-7/16 inches 112 x 60 x 112 mm VIDEO OUT, AUDIO OUT L/R, jack Specifications and features are subject to change without notice. In catalogs and on packaging, the letter at the end of the product name indicates the color. · The operating instructions in this manual apply to the iPod as of June 2007, and may change with future upgrades to the iPod software. · The AC adapter supplied with the DS-A1X is designed exclusively for use with the DS-A1X. [. . . ]