User manual ONKYO DS-A1XP

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. If liquid has been spilled, or objects have fallen into the apparatus, C. [. . . ] To control your iPod with your AV receiver/amp's remote controller, select the matching remote control mode. AV receiver/Amp remote controller's mode 5 Getting Started--Continued Hooking Up the RI Dock Depending on the Onkyo AV receiver/amp that you're using, choose connection method A or B. A: Connect the RI Dock's AUDIO OUT L/R jacks to an RI Dock-compatible input on your Onkyo AV receiver/amp. (You might need to change the input display to "HDD" or "DOCK. ") B: Connect the RI Dock's AUDIO OUT L/R jacks to the TAPE (MD, CDR) IN jacks on your Onkyo AV receiver/amp. Note: When the AC adapter is unplugged or not connected to the RI Dock, the RI Dock will output no sound, functions will not work, and your iPod's battery will not be charged. Do not connect headphones to the jack, as it will damage your equipment. What to do if you already have a component connected to your AV receiver/amp's TAPE input or RI Dock-compatible input Connect the RI Dock to an unused AV input on your AV receiver/amp. However, you will not be able to use any of the functions. AC adapter Supplied cable White Red Wall outlet Supplied AV cable White AUDIO INPUT L R Red -capable AV receiver/amp 1. Using the supplied AV cable, connect the RI Dock's AUDIO OUT L/R jacks to a suitable audio input on your AV receiver/amp. The input you use depends on the type of Onkyo AV receiver/amp you have. Using the supplied cable, connect the RI Dock's jack to an jack on one of the Onkyo components in your system. Connect the supplied AC adapter to the RI Dock's DC IN jack. 6 Using the RI Dock Putting Your iPod in the RI Dock 1. Turn on your AV receiver/amp, and select the appropriate inputs on your AV receiver/amp. Align your iPod with the RI Dock's iPod slot, and carefully place your iPod in the slot, as shown. Function Overview Basic Operation Note: · Your AV receiver/amp may take several seconds to startup, so you might not hear the first few seconds of the first song. · System On Function When you turn on your AV receiver/amp, the iPod turns on as well. With some AV receivers/amps, you may need to press the [ON] button on your AV receiver/amp's remote controller's twice to turn on the other components in your system. · System Off Function When you turn off your AV receiver/amp, the iPod turns off as well. · Auto Power On Function*1 If you start iPod playback while your AV receiver/amp is on Standby, your AV receiver/amp will automatically turn on and select your iPod as the input source. · Direct Change Function*1 If you start iPod playback while listening to another input source, your AV receiver/amp will automatically select your iPod as the input source. · Timer Play You can use your AV receiver/amp's Timer function to turn on your AV receiver/amp and iPod and start playback at a specified time. If you adjust your iPod's volume control while it's in the RI Dock, make sure it's not set too high before you reconnect your headphones. Using Your iPod's Alarm Clock You can use your iPod's Alarm Clock function to automatically turn on your iPod and AV receiver/amp at a specified time. Your AV receiver/amp's input source will automatically be set to the input to which your iPod is connected. Notes: · To use this function, your iPod must be in the RI Dock, and the RI Dock must be connected to your AV receiver/amp with both an cable and an audio cable. [. . . ] (220 g) 4-7/16 x 2-3/8 x 4-7/16 inches 112 x 60 x 112 mm jack AUDIO OUT L/R, Specifications and features are subject to change without notice. In catalogs and on packaging, the letter at the end of the product name indicates the color. · The operating instructions in this manual apply to the iPod as of June 2007, and may change with future upgrades to the iPod software. · The AC adapter supplied with the DS-A1XP is designed exclusively for use with the DS-A1XP. [. . . ]