User manual ONKYO DX-C320

[. . . ] USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. DX-C320 INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO LASER BEAM. INSTRUCTION MANUAL 128-6204 SAFETY PRECAUTIONS 1. Do not expose to excessive heat, direct sunlight, dust, moisture, vibration or shock. Disconnect the unit from the wall outlet when the unit is not to be used for an extended period of time. [. . . ] recommended 1. 2V - 650mA) NOTE: Zinc/Carbon or Zinc/Chloride type batteries are not recommended for this unit as their use will result in extremely short playing times. To economize on batteries, it is recommended that the AC adapter supplied with this unit be used whenever possible. 13 14 15 16 AC Operation 1. Insert the DC plug, at the end of the AC adapter cord into the DC input jack on the unit. Note: If the AC plug of this unit does not fit in your AC outlet, a plug adaptor (Not supplied) should be used. LOW BATTERY ALERT When the battery indicator (Batt. ) appears in the LCD panel, the batteries are becoming discharged. The CD player will not function properly and the batteries must be replaced. If Ni-cd rechargeable batteries are being used follow the instructions on how to recharge the batteries detailed in this manual. AC ADAP TOR 1. 8. Charge Indicator Skip Up Button Skip Down Button DC Input Socket Battery Door Hold Switch LCD Display Play/Pause Button 9. Volume Control ON 2 3 CHARGING AND USE OF RECHARGEABLE BATTERIES Rechargeable Battery Operation This unit can fully recharge specified rechargeable batteries, in approximately 15 hours. The rechargeable batteries (NOT supplied) should be recharged before they are used for the first time, if they are low in power or they have not been used for a long period (over 60 days). Open the battery compartment cover and insert two of the recommended rechargeable batteries, matching polarity. CAUTION: Wait for the disc to stop rotating before pressing the OPEN button. 5 CLEANING DISCS · Finger prints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a soft cloth should remove most particles. · Never use thinner, benzene, record cleaner or anti-static spray on a compact disc. Such chemicals can damage its plastic surface. LCD DISPLAY INFORMATION When power is applied to the unit · If disc is in, auto adjustment is started. Put the disc and close the lid, then the player starts auto adjustment again. · If the player can't read the Table of Contents (TOC) then Er is displayed. · When TOC data has been read, the display shows · Track No. · If ANTI-SKIP key is pressed, then disappears. BASIC DISC PLAY The Compact Disc Player can play Audio Discs such as CD-Recordables and CDRewritables. Press the PLAY button to start playing. Increasing the bass Set the BASS BOOST switch to the ON position. NOTE: The bass boost performance will be dependent on the VOLUME control setting. [. . . ] · Press I<<, to hear the INTRO of the previous track NORMAL REPEAT 1 REPEAT ALL INTRO PROGRAM PLAY This allows selected tracks on the disc to be played in any order desired. RANDOM When this is showing on the LCD display. All tracks on the disc will be repeated. MODE To set the program play · Programs can be set in the STOP mode or normal play mode. Press I<< or >>I to select the desired track. During playback MODE X1 During playback X2 3. To complete programming and start play Press PLAY/PAUSE button, then PRG stops flash and starts play soon. [. . . ]