User manual ONKYO HT-S6505

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, PORTABLE CART WARNING tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] When enabling the HDMI Through function, regardless of whether the AV receiver is on or in standby, both audio and video streams from an HDMI input will be output to the TV or other components via HDMI connection. Note that the indicator may not light under certain conditions (➔ page 44). This setting is fixed to “Auto” automatically when the above “HDMI Ctrl (RIHD)” setting is set to “On”, resulting in automatic input source selection. note • Only an input source assigned to an HDMI IN via “HDMI Input” is enabled (➔ page 45). € The power consumption in standby mode will increase during the HDMI Through function; however in the following cases, the power consumption can be saved: – The TV is in standby mode. € Refer to the connected component’s instruction manual for details. € Depending on the connected component, the correct input source may not be selected with the setting fixed to “Auto”. • This setting is set to “Off” automatically when the “HDMI Ctrl (RIHD)” setting is set to “Off”. – Audio TV Out Off On This preference determines whether the incoming audio signal is output from the HDMI output. You may want to turn this preference on if your TV is connected to the HDMI output and you want to listen to the audio from a connected component through your TV’s speakers. Note • If “On” is selected and the audio can be output from the TV, the AV receiver will output no sound through its speakers. In this case, “TV Speaker” appears on the AV receiver’s display by pressing DISPLAY. € When “HDMI Ctrl (RIHD)” is set to “On”, this setting is fixed to “Auto”. € With some TVs and input signals, no sound may be output even when this setting is set to “On”. € When “Audio TV Out” or “HDMI Ctrl (RIHD)” is set to “On” and you’re listening through your TV’s speakers (➔ page 15), turning up the AV receiver’s volume control will make the sound be output from the AV receiver’s front left and right speakers. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume. € Listening mode cannot be changed when this setting is set to “On” and the input source is not HDMI. En-52 Advanced Operations ■ Audio Return Ch (ARC) Off Auto: The audio signal from your TV tuner can be sent to HDMI OUT of the AV receiver. The audio return channel (ARC) function allows an ARC capable TV to send the audio stream to HDMI OUT of the AV receiver. To use this function, you must select the TV/CD input selector and your TV must be ARC capable. Default setting: “- - - -” Note • This setting is fixed to “- - - -” when the “HDMI Ctrl (RIHD)” setting is set to “Off”. € This setting is set to “Auto” automatically when the “HDMI Ctrl (RIHD)” setting is set to “On” for the first time. [. . . ] Profile: You can play tracks from “Recently Listened Tracks”, “Library” and “Neighbours”. 3 Use q/w to select a station , and press ENTER or 1 to start playback. Enabled buttons: 1, 2, 6 ■ Menu Items I Love this track: Track information is saved in Last. Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). [. . . ]