User manual ONKYO HT-S7100

[. . . ] 2 7. 1ch Home Theater System HT-S7100 AV Receiver (TX-SR606) Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Instruction Manual Basic Operation Playing your AV components . . . . . . . Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new 7. 1ch Home Theater System. [. . . ] If no stations are found, the message "Not Found" appears. 3 Press the [RT/PTY/TP] button twice. Use the PRESET [ ]/[ ] buttons to select the type of program you want. See the table on page 55. ENTER 2 RT/PTY/TP 3 PRESET 56 Using the Listening Modes Selecting the Listening Modes For a description of each listening mode, see "About the Listening Modes" on page 64. · The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, or HDMI). · The listening modes you can select depends on the format of the input signal. To check the format, see "Displaying Source Information" on page 49. · While a pair of headphones is connected, you can only select the Pure Audio, Mono, Direct, or Stereo listening mode. Selecting with the Remote Controller MOVIE/TV MUSIC STEREO GAME Selecting on the AV Receiver MUSIC MASTER VOLUME [MOVIE/TV] button This button selects the listening modes intended for use with movies and TV. TUNING PRESET ON/STANDBY STANDBY ZONE 2 [MUSIC] button This button selects the listening modes intended for use with music. [GAME] button This button selects the listening modes intended for use with video games. [STEREO] button This button selects the Stereo listening mode and All Channel Stereo listening mode. PURE AUDIO MULTI CH DVD VCR/DVR CBL/SAT GAME/TV AUX TAPE TUNER CD SETUP ENTER RETURN AUX INPUT PHONES ZONE 2 OFF ZONE 2 LEVEL TONE MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE SETUP MIC VIDEO L AUDIO R LISTENING MODE CLEAR AV RECEIVER TX-SR606 PURE AUDIO GAME MOVIE/TV [PURE AUDIO] button (not North American model) This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver's display is turned off and only the HDMI outputs output video signals. [MOVIE/TV] button This button selects the listening modes intended for use with movies and TV. [MUSIC] button This button selects the listening modes intended for use with music. [GAME] button This button selects the listening modes intended for use with video games. 57 Using the Listening Modes--Continued Listening Modes Available for Each Source Format Analog and PCM Sources PCM Source format 176. 4/ 32­96 kHz*1 192kHz*2 Media Button [PURE AUDIO] Listening Mode Pure Audio*3 Mono Multichannel Neo:6 Dolby PLII Movie/ Dolby PLIIx Movie*4 DolbyEX [MOVIE/ TV] Neo:6 Cinema MonoMovie*6 *7 TV Logic*6 *7 AllChStereo FullMono T-D *7 Pure Audio*3 Direct Stereo Multichannel Neo:6 Dolby PLII Music/ Dolby PLIIx Music*4 [MUSIC] DolbyEX Neo:6 Music Orchestra*6 *7 Unplugged*6 *7 Studio-Mix*6 *7 AllChStereo FullMono Multichannel Neo:6 Dolby PLII Game/ Dolby PLIIx Game*4 [GAME] DolbyEX AllChStereo FullMono T-D *7 [STEREO] *1. AllChStereo Stereo CD, TV, radio, Multi channel Analog DVD 32­96kHz*1 Multichannel 2ch DVD Mono/ Multiplex Multichannel 176. 4/192kHz*2 MultiMono/ 2ch channel Multiplex DVD *5 *5 *5 *5 *5 *5 *5 *5 32/44, 1/48/88. 2/96kHz DVD-Audio discs output multichannel 176. 4/192kHz PCM only via HDMI. If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used. PCM of 64kHz, 88. 2kHz, and 96kHz are processed at 32kHz, 44. 1kHz, and 48kHz respectively. Not available while Powered Zone 2 is being used. 58 Using the Listening Modes--Continued Dolby Digital and Dolby Digital Plus Sources Dolby Digital Source format Media Listening Mode Button [PURE AUDIO] Pure Audio*1 Mono DolbyDigital DolbyDigital Plus Neo:6 Dolby PLII Movie/Dolby PLIIx Movie*3 [MOVIE/TV] DolbyEX Neo:6 Cinema MonoMovie*5 TV Logic*5 AllChStereo FullMono T-D Pure Audio*1 Direct Stereo DolbyDigital DolbyDigital Plus Neo:6 [MUSIC] Dolby PLII Music/Dolby PLIIx Music*3 DolbyEX Neo:6 Music Orchestra*5 Unplugged*5 Studio-Mix*5 AllChStereo FullMono DolbyDigital DolbyDigital Plus Neo:6 [GAME] Dolby PLII Game/Dolby PLIIx Game*3 DolbyEX AllChStereo FullMono T-D [STEREO] *1. AllChStereo Stereo Multichannel 2ch Mono/ Multiplex Dolby Digital Plus Mono/ 2ch Multiplex Blu-ray, HD DVD Multichannel DVD, DTV, etc. *4 *4 *4 *2 *4 *4 *4 *4 *4 *4 *4 *2 *4 *4 *4 *2 *4 *4 *4 North American model doesn't have Pure Audio listening mode. If there are no surround back speakers, depending on the input signal, Dolby Digital may be used. If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used. Not available while Powered Zone 2 is being used. Note: · With some HD DVD and Blu-ray discs, a noise may be heard during playback. It is not a malfunction. 59 Using the Listening Modes--Continued DTS Sources Source format Media Button Listening Mode *1 DTS, DTS 96/24 Multichannel 2ch DVD, CD, etc. Mono DTS Discrete/Matrix DVD, CD, etc. [PURE AUDIO] Pure Audio Mono DTS, DTS 96/24 DTS-ES Discrete/Matrix Neo:6 Dolby PLII Movie/Dolby PLIIx Movie [MOVIE/TV] DolbyEX Neo:6 Cinema MonoMovie*5 *6 TV Logic *5 *6 *3 *4 *4 *4 *4 *4 *4 *4 *3 *2 AllChStereo FullMono T-D*6 Pure Audio*1 Direct Stereo DTS, DTS 96/24 DTS-ES Discrete/Matrix Neo:6 [MUSIC] Dolby PLII Music/Dolby PLIIx Music DolbyEX Neo:6 Music Orchestra *5 *6 *3 *2 Unplugged*5 *6 Studio-Mix*5 *6 AllChStereo FullMono DTS, DTS 96/24 DTS-ES Discrete/Matrix Neo:6 [GAME] Dolby PLII Game/Dolby PLIIx Game DolbyEX AllChStereo FullMono T-D*6 [STEREO] *1. [. . . ] · Video Attenuation This setting can be made for the DVD, VCR/DVR, CBL/SAT, GAME/TV, or AUX input. If you have a games console connected to the S-Video or composite video input, and the picture isn't very clear, you can attenuate the gain. Video ATT:2: Gain is reduced by 2 dB. The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. [. . . ]