User manual ONKYO HT-S770

[. . . ] 2 AV Receiver HT-R520 Instruction Manual Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Advanced Operation . . . . . . . . . . . . . . . . . . . . . [. . . ] See "Connecting Your Speakers" on page 17 and "Speaker Configuration" on page 48. Listening mode availability depends on the format of the current input signal. For example, the Dolby Digital listening modes are available only while a Dolby Digital format signal is being input. The following table lists all the possible listening modes and indicates which modes can be selected for each input signal format. Dolby Digital 3/2. 1 or 3/3. 1 2/0 (stereo) Other 3/2. 1 2/0 (stereo) DTS 96/24 *5 DTS-ES PCM Input Signal Format PCM, analog CD, TV, LD, VHS, MD, vinyl, radio, cassette, cable, satellite, etc. 96 kHz Source Listening mode Direct Stereo PLII Movie/Music/Game PLIIx Movie/Game *2 PLIIx Music *2 *1 96 kHz/24 bit DVD, etc. DVD, digital cable/satellite, etc. DVD, LD, CD, etc. *3 *3 *3 Neo:6 Cinema/Music Dolby Digital Dolby Digital EX *4 DTS DTS 96/24 DTS-ES Discrete *4 DTS-ES Matrix *4 DTS+Neo:6 *3 DTS+Dolby EX *3 Orchestra Unplugged Onkyo original DSP Studio-Mix TV Logic All Ch Stereo Discrete Matrix *1: Available when the Surr Back setting in the Speaker Configuration is set to None (see page 48). *2: Available when the Surr Back setting in the Speaker Configuration is NOT set to None (see page 48). *3: Available when the Surr Back setting in the Speaker Configuration is NOT set to None (page 48) and the Dolby Digital/DTS setting (page 42) is set to On. *4: Available when the Surr Back setting in the Speaker Configuration is NOT set to None (page 48) and the Dolby Digital/DTS setting (page 42) is set to either On or Auto. *5: For DTS 96 kHz/24-bit material, if the listening mode is Stereo or DTS 96/24, audio is processed at 96 kHz. For all other listening modes, it's processed at 48 kHz. Tip: You can check the format of a digital input signal on page 33, "Displaying Source Information. " 38 Using the Listening Modes--Continued Selecting Listening Modes See "About the Listening Modes" on page 40 for detailed information about the listening modes. · The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the HT-R520 with a digital audio connection (coaxial or optical). · Listening mode availability depends on the format of the current input signal. · While speaker set B is on or a pair of headphones are connected, you can only select the Direct or Stereo listening mode. · While the multichannel input is being used, only the Direct listening modes can be selected. Selecting with the Remote Controller DVD CD MD CDR TV VCR CABLE SAT DIMMER TV INPUT PM TO SLEEP ENU MEN U + CH DISC ENTER VOL EX IT PREV CH RE GU ID E TURN U SET P DISPLAY MUTING REC SP A SP B RANDOM ALL ST AUDIO SUBTITLE ALL ST ANGLE LAST M STEREO SURR DIRECT SURR REPEAT A-B DIRECT SEARCH DSP MEMORY DSP STEREO DSP TEST TONE CH SEL LEVEL - LEVEL+ OPEN/CLOSE VIDEO OFF OR-EQ L NIGHT CINE FLTR RC-570M [DIRECT] button This button selects the Direct listening mode. Selecting on the HT-R520 [STEREO] button This button selects the Stereo listening mode. MASTER VOLUME TUNING ENTER STANDBY/ON PRESET STANDBY SETUP RETURN A SPEAKERS B TONE STEREO LISTENING MODE DISPLAY DIGITAL INPUT MEMORY TUNING MODE CLEAR PHONES VIDEO 3 INPUT MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD S VIDEO VIDEO L AUDIO R VCR STEREO LISTENING MODE [SURR] button This button selects the Dolby Digital and DTS listening modes. When the multichannel DVD input is selected, this button is also used when adjusting the bass and treble (see page 36). [ DSP] & [DSP ] buttons These buttons select the Onkyo original DSP modes. [All ST] button This button selects the All Ch Stereo listening mode. [STEREO] button This button selects the Stereo listening mode. LISTENING MODE [ ] [ ] buttons These buttons select all of the listening modes that can be used with the current input source. The surround modes available also depends on the Dolby Digital/DTS setting (see page 42). 39 Using the Listening Modes--Continued About the Listing Modes The HT-R520's surround indicators show which speakers are active in each listening mode. Front left Center Front right Subwoofer · Dolby Pro Logic IIx Game Use this mode with video games that feature stereo sound. Neo:6 Surround left Surround back Surround right Basic Modes Direct The selected input source is output by the front left and right speakers only, with minimal processing for a pure sound. Stereo This mode creates 6. 1-channel surround from 2-channel analog sources. There are two modes of operation: Cinema mode, which is suited to movies, and Music mode, which is for listening to music. · Cinema mode simulates the realistic sense of movement that you get with 6. 1-channel surround sound sources. Use this mode with videos, DVDs, and TV programs that feature stereo sound. · Music mode uses the surround channels to simulate a natural sound field that cannot be produced with conventional stereo. [. . . ] In some situations, however, discoloration may still be an issue, in which case you should turn off your TV or monitor, wait 15 to 30 minutes, and then turn it back on again. This normally activates the degaussing function, which neutralizes the magnetic field, thereby removing any discoloration effects. If discoloration problems persist, try moving the speakers away from your TV or monitor. Note that discoloration can also be caused by a magnet or demagnetizing tool that's too close to your TV or monitor. Input Signal Warning The speakers can handle the specified input power when used for normal music reproduction. [. . . ]