User manual ONKYO PR-SC5508

[. . . ] Contents AV Controller Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PR-SC5508 Instruction Manual Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Turning On & Basic Operations . . . . . . 25 Advanced Operations . . . . . . . . . . . . . . . . . 43 Controlling iPod & Other Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Controller. Please retain this manual for future reference. En Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] With the default "Film Mode" setting of "Auto", the AV controller automatically detects the type of content and processes it accordingly to achieve the best picture quality. If the AV controller detects the type of content incorrectly due to characteristics of the disc, you can select "Video" or "Film" manually. With Edge Enhancement, you can make the picture appear sharper. Full: Zoom: Wide Zoom: Smart Zoom: En 56 Mosquito NR*2*3*4*6 Off: Mosquito noise reduction off. With Mosquito Noise Reduction, you can remove the shimmering or haziness that sometimes appears around objects in the picture. With Random Noise Reduction, you can remove indiscriminate picture noise, such as film grain. With Block Noise Reduction, you can remove the block distortion that sometimes appears in the picture. Resolution*2*4 Through: Select this to pass video through the AV controller at the same resolution and with no conversion. Auto: Select this to have the AV controller automatically convert video at resolutions not supported by your TV. When the "Monitor Out" is set to "Analog", this setting will be changed to "Through". 480p (480p/576p): Select this for 480p or 576p output and video conversion as necessary. 1080i: Select this for 1080i output and video conversion as necessary. 1080p: Select this for 1080p output and video conversion as necessary. When the "Monitor Out" is set to "Analog", this setting will be changed to "1080i". 1080p/24: Select this for 1080p output at 24 frames per second and video conversion as necessary. When the "Monitor Out" is set to "Analog", this setting will be changed to "1080i". You can specify the output resolution for the HDMI outputs and have the AV controller upconvert the picture resolution as necessary to match the resolution supported by your TV. Available only when "Source" has been selected in the "Resolution" of the "Monitor Out" setting ( 45). Brightness*1*2*4 ­50 to 0 to +50 With this setting you can adjust the picture brightness. Contrast*1*2*4 ­50 to 0 to +50 With this setting you can adjust contrast. Hue*1*2*4 ­20 to 0 to +20 With this setting you can adjust the red/green balance. Saturation*1*2*4 ­50 to 0 to +50 With this setting you can adjust saturation. Gamma*2*4 ­3 to 0 to +3 Adjust the balance of incoming picture R (red), G (green), and B (blue) color data signal to the output color data signal. Red Brightness*2*4 ­50 to 0 to +50 With this setting you can adjust the picture red brightness. [. . . ] As the updating progresses, the TV screen may disappear depending on the program updated. In this case, you can see the update progress on the front display of the AV controller. The TV screen will reappear when you finish the update and turn on the AV controller. Do not turn off the AV controller and do not remove the USB storage device during updating process. [. . . ]