User manual ONKYO RBX-500

[. . . ] English Français Español Italiano Deutsch Nederlands Svenska Dock Music System RBX-500 Instruction Manual Thank you for purchasing an Onkyo DOCK Music System. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your Speaker. Sv-14 The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] En-6 Main unit Top panel and front panel 5 6 12 34 7 e iPod/iPhone dock ( page 11) Connects with iPod or iPhone. B f Light receiving area for remote controller g Power/ Operation indicator White: Power ON, White (dark): Charging iPod/iPhone (Standby), Off: Standby Orange: Bluetooth standby During the power is ON, when each button is pressed, white indicator turns off for a short time (flashes in case of VOLUME +/- button). As for button, indicator flashes as follows: NORMAL: Flashes once ENHANCE: Flashes 2 times VOCAL: Flashes 3 times (3D SOUND) button Switches 3D sound effect in the order shown below: NORMAL ENHANCE VOCAL (BLUETOOTH) button, Bluetooth indicator ( page 12) Activates Bluetooth input, switches Bluetooth ON/OFF or activates Bluetooth pairing mode. White operation indicator flashes during operation, and flashing stops when volume reaches minimum or maximum. This terminal is only for power supply; it cannot be used for playing sound. B LINE IN terminal ( page 13) Connected with a sound output of an external device with a commercially-available stereo mini-plug audio cable. c DC IN terminal ( page 8) Connected with the attached AC adapter. En-7 Main unit—Continued Connect AC adapter DC plug To an AC wall outlet (Plug type varies from country to country. ) Notes: 1 2 Insert the DC plug of AC adapter into the DC IN jack of the main unit. Connect the Power cord with the AC adapter, then insert the power connector into an outlet. Do not use any other AC adapter than the attached one, and do not use the attached AC adapter with other devices. USB Power terminal USB terminal on the back side of the main unit is for power. When iPod or iPhone is connected with the dock, this USB terminal is not powered. A cable included in the connected device or a suitable commercially-available cable should be used. Notes: Do not use this terminal for any other use than battery charge. En-8 Main unit—Continued Remote controller Buttons 1 3 4 8 9 j 2 5 6 7 8 k j i the beginning of the current track, and pressing the  button twice is for returning to the previous track. (REPEAT) button Switches the REPEAT modes of iPod/iPhone connected with the dock. U/I button 1 2 When input mode is iPod, you can control iPod/iPhone to play music. Tips: When an iPod/iPhone is connected to the dock, input mode is automatically changed to iPod. This also happens when you start playing music in iPod/iPhone; the input mode is automatically changed to iPod. When RBX-500 is in the standby mode, the power will automatically turns on. Compatibility of iPod/iPhone This unit can work with the following iPod/iPhone; • iPod touch (1st, 2nd, 3rd and 4th generation) • iPod classic • iPod nano (3rd, 4th, 5th and 6th generation) • iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G and iPhone Notes: Be sure to use update iOS for iPod/iPhone. [. . . ] change input mode correctly by pressing , and button on the remote controller ( page 9). € In case that the sound from the external device is too small through Bluetooth connection or LINE connection, control the external device to turn up the sound volume. IPod/iPhone does not work • If the case is attached to iPod/iPhone connected with the dock, remove the case. € Check if your iPod/iPhone model is compatible with this product ( page 11). [. . . ]