User manual ONKYO RC-630M REMOTE CONTROL CODES

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Information is displayed for about 3 seconds, then the previous display reappears. Below are the input display options for each input: DIG1: DIG1, DIG1(DOCK) DIG2: DIG2, DIG2(DOCK), DIG2(TV) DIG3: DIG3(TV), DIG3, DIG3(DOCK) LINE1: LINE1, LINE1(DOCK), LINE1(DVD), LINE1(CD), LINE1(TAPE), LINE1(MD), LINE1(CDR), LINE1(TV). LINE2: LINE2, LINE2(DOCK), LINE2(DVD), LINE2(CD), LINE2(TAPE), LINE2(MD), LINE2(CDR), LINE2(TV). Example displays are shown below. 30 Playing Your Components--Continued Notes: · To listen to the TV's audio by using the ARC (Audio Return Channel), in HDMI Setup, HDMI Control must be set to On and ARC must be set to Auto (see page 44). · DIGITAL IN 1 (DIG1), DIGITAL IN 2 (DIG2), or DIGITAL IN 3 (DIG3) cannot be set the same. Likewise for LINE 1 and LINE 2. 31 Using the Listening Modes Selecting the Listening Modes For a description of each listening mode, see "About the Listening Modes" on page 33. · The Dolby Digital and DTS listening modes can only be selected if your Blu-ray/DVD player/recorder is connected to the RC-630M with a digital audio connection (coaxial, optical, or HDMI). · The listening modes that you can select depends on the format of the input signal. To check the format, see "Displaying Source Information" on page 30. LISTENING MODE STANDBY HDMI Thru LISTENING MODE To select the listening modes, repeatedly press the [LISTENING MODE] buttons on the RC-630M or remote controller. The name of the selected listening mode is shown on the display. 32 Using the Listening Modes--Continued About the Listening Modes The RC-630M's listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. 1 2 3 4 a b c d Subwoofer Front speakers Center speaker (optional) Surround speakers (optional) Speaker Layout 2. 1 3. 1 5. 1 Input Sources The following audio formats are supported by the listening modes. *1 *1. This is mono (monophonic) sound. Two independent audio signal channels are reproduced through two speakers. This surround system has five main channels of sound and a sixth subwoofer channel (called the point-one channel). This is a further sound enhancement to 5. 1 channel sound with two additional speakers that provide greater sound envelopment and more accurate positioning of sounds. The RC-630M outputs this source as 5. 1-channel surround sound. 33 Using the Listening Modes--Continued Listening Modes Listening Mode Description In this mode, audio from the input source is output without surround-sound processing. The Sp Config and Sp Distance settings are active, but much of the processing set via Audio Adjust is disabled. This mode adds realistic acoustics to TV shows produced in a TV studio, surround effects to the entire sound, and clarity to voices. Ideal for background music, this mode fills the entire listening area with stereo sound from the front, surround, and surround back speakers. In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room. With this mode, you can enjoy virtual surround sound even with only two or three speakers. This works by controlling how sounds reach the listener's left and right ears. Good results may not be possible if there's too much reverb, so we recommend that you use this mode in an environment with little or no natural reverb. See "Front 5. 1ch" on page 42 to get the best result from this mode. Input Source Speaker Layout Orchestra Unplugged Studio-Mix TV Logic Game-RPG Game-Action Game-Rock Game-Sports All Ch Stereo Full Mono T-D (TheaterDimensional) Notes: *2. Depending on your player, setting your player to output PCM may produce a better sound. · The listening modes cannot be selected with some source formats. 35 Using the Listening Modes--Continued Adjusting Speaker Levels You can adjust the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the RC-630M is set to Standby. Use the remote controller's [CH SEL] button to select each speaker, and use the Left and Right []/[] buttons to adjust the volume. CH SEL L NIGHT Late Night Function With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels--ideal for watching movies late at night when you don't want to disturb anyone. Press the remote controller's [L NIGHT] button repeatedly to select the following options: You can adjust the volume of each speaker from ­12 dB to +12 dB (­15 dB to +12 dB for the subwoofer). [. . . ] (As of February 2010) See the Onkyo web site for latest information. TV Operations that can be performed with connection For -compatible TV · Panasonic VIERA Link compatible TV · Toshiba REGZA-LINK compatible TV · Sharp TV (See Onkyo web site for latest information on compatible models. ) Players/Recorders · Onkyo and Integra -compatible players · Panasonic VIERA Link compatible players and recorders (only when used together with Panasonic VIERA Link compatible TV) · Toshiba REGZA-LINK compatible players and recorders (only when used together with Toshiba REGZALINK compatible TV) · Sharp players and recorders (only when used together with Sharp TV) * Models other than those mentioned above may have some interoperability if compatible with CEC which is part of the HDMI Standard, but operation cannot be guaranteed. The following linked operation is possible by connecting the RC-630M to an compatible TV. · The RC-630M will enter Standby mode when the power of the TV is turned to Standby. · You can set on the menu screen of the TV to either output the audio from the speakers connected to the RC-630M, or from the speakers of the TV. · It is possible to output the video/audio from the antenna or from the input jack of the TV from the speakers connected to the RC-630M. [. . . ]