User manual ONKYO SKW-520

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, PORTABLE CART WARNING tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. [. . . ] (3 m) (Green) · Surround speakers (SKM-520S/SKB-520) · Speaker cables for surround speakers 30 ft. (9 m) For Canadian models For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. (Blue) (Gray) (Brown) · RCA cable for subwoofer connection · Subwoofer (SKW-520) Modèle pour les Canadien Sur les modèles dont la fiche est polarisee: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. The alphabet displayed at the end of the product name found in catalogs and on package represents the color of the system. Though the color varies, the specifications and operations are the same. Attaching and detaching the speaker grilles Front and Center spakers have detachable grilles. While holding the bottom edge of the speaker grille with your both hands, pull it gently toward you to remove the bottom of the grille. In the same way, gently pull the upper edge of the speaker grille toward you to remove it from the main unit. To replace the grill, push the projections at the corners into the grille plug holes on the speaker cabinet. Removal Replacement 3 Getting to know Your Speaker Package Subwoofer (SKW-520) Front Connecting the Speakers Read the following before connecting your speakers: · Turn off your amp before making any connections. Connect positive (+) terminals to only positive (+) terminals, and negative (­) terminals to only negative (­) terminals. If the speakers are wired incorrectly, the sound will be out of phase and will sound unnatural. Doing so may damage your amp. Connecting the Speaker Cables 1 Rear 1 MIN MAX OUTPUT LEVEL LINE INPUT 2 3 To AC outlet Use the supplied cables to connect each speaker's input terminals to the corresponding speaker output terminals on your AV receiver. To make a connection, while pressing the terminal lever, insert the wire into the hole, and then release the lever. Make sure that the terminals are gripping the bare wires, not the insulation. A STANDBY/ON indicator Red: Subwoofer in standby mode Green: Subwoofer on With the Auto Standby function, the SKW-520 automatically turns on when an input signal is detected in Standby mode. When there's no input signal for a while, the SKW-520 automatically enters Standby mode. Connecting the Subwoofer 1 Using the supplied RCA cable, connect the subwoofer's LINE INPUT to your AV receiver's SUBWOOFER PRE OUT. Example, adding the HT-R520: SKW-520 SKF-520FR SKF-520FL B OUTPUT LEVEL control This control is used to adjust the volume of the subwoofer. SKC-520C C LINE INPUT This RCA input should be connected to the subwoofer pre out on your AV receiver, amp, or other receiver with supplied RCA cable. If you are also using the HT-R520: Connect this input to the subwoofer pre out of the HT-R520. Note: The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver or amp. SUBWOOFER PRE OUT Green Red FRONT SPEAKERS A SURROUND SPEAKERS CENTER SPEAKER White L L R R SURROUND BACK SPEAKER Gray COMPONENT VIDEO VIDEO 1 / 2 / 3 IN DVD IN OUT Brown Blue ANTENNA AM FM 75 Y Class 2 Wiring FRONT SPEAKERS B FRONT SPEAKERS A SURROUND SPEAKERS CENTER SPEAKER AC OUTLET AC 120 V 60 Hz SWITCHED 120 W 1 A MAX. PB L VIDEO 2 REMOTE CONTROL IN L PR VIDEO 1 OUT IN DVD IN MONITOR OUT VIDEO DIGITAL IN 3 OPTICAL 2 COAXIAL 1 L R R R S VIDEO IN OUT IN IN IN OUT IN FRONT SURR CENTER L SUBWOOFER PRE OUT L L AV RECEIVER SURROUND BACK SPEAKER MODEL NO. HT-R 520 R R CD TAPE VIDEO 2 VIDEO 1 R DVD SUB WOOFER SKM-520SR SKB-520 SKM-520SL 4 About Home Theater Enjoying Home Theater The Home Theater means that you can enjoy surround sound with a real sense of movement in your own home--just like being in a movie theater or concert hall. Front left and right speakers These output the overall sound. Their role in a home theater is to provide a solid anchor for the sound image. They should be positioned facing the listener at about ear level, and equidistant from the TV. Angle them inward so as to create a triangle, with the listener at the apex. Center speaker This speaker enhances the front left and right speakers, making sound movements distinct and providing a full sound image. Position it close to your TV facing forward at about ear level, or at the same height as the front left and right speakers. Put it somewhere where it won't slide around or fall. Surround back speaker This speaker further enhances the realism of surround sound and improves sound localization behind the listener. [. . . ] External interference from a TV or other electronic device is being picked up. Choose source material with more bass content. Make sure that the RCA cable is properly connected to the subwoofer's LINE INPUT. Make sure your audio system is grounded properly. Specifications Powered Subwoofer (SKW-520) Type: Input sensitivity/impedance: Maximum output power: Frequency response: Cabinet capacity: Dimensions (W × H × D): Weight: Drivers unit: Power supply: Power consumption: Other: Bass-reflex 330 mV / 100 k 220 W (Dynamic Power) 25 Hz­150 Hz 1. 35 cubic feet (38. 5 L) 10-13/16" × 20-3/8" × 16-3/16" (275 × 518 × 411 mm) 30 lbs. (13. 6 kg) 10 inch Cone Woofer AC 120 V, 60 Hz 150 W Auto Standby function Center Speaker (SKC-520C) Type: Impedance: Maximum input power: Output sound pressure level: Frequency response: Crossover frequency: Cabinet capacity: Dimensions (W × H × D): Weight: Speaker: Terminal: Other: 2 Way Bass-reflex 8 130 W 85 dB/W/m 60 Hz­50 kHz 4, 5 kHz 0. 27 cubic feet (7. 7 L) 15-1/4" × 6-3/16" × 7-15/16" (387 × 157 × 202 mm) 8. 2 lbs. [. . . ]