User manual ONKYO SKW-570

[. . . ] Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 7. 1ch Home Theater System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 HT-S5200 AV Receiver (HT-R570) Speaker Package (HTP-570) Front Speakers (SKF-570 L/R) Center Speaker (SKC-570) Surround Speakers (SKR-570 L/R) Surround Back Speakers (SKB-570 L/R) Subwoofer (SKW-570) Turning On & First Time Setup . . . . . 38 Basic Operations. . . . . . . . . . . . . . . . . . . . . . . . . 44 Dock for iPod (UP-A1L) Using the Listening Modes . . . . . . . . 64 Instruction Manual Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Controlling Other Components . . . . 78 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Thank you for purchasing an Onkyo 7. 1ch Home Theater System. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new 7. 1ch Home Theater System. Please retain this manual for future reference. En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] If the input signal is not PCM, the PCM indicator will flash and there will be no sound. If the input signal is not DTS, the DTS indicator will flash and there will be no sound. If no digital input signal is present, the corresponding analog input is used instead. 47 Listening to the Radio AM/FM Frequency Step Setup 4 RECEIVER Use the Left and Right [ ]/[ ] buttons to select: 200k/10k: Select if 200k/10k steps are used in your area. Setup closes. 5 ENTER SETUP For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 1 Press the [RECEIVER] button, followed by the [SETUP] button. 2 Use the Up and Down [ ]/[ ] buttons to select "8. Hardware", and then press [ENTER]. 3 Use the Up and Down [ ]/[ ] buttons to select "FM/AM". 48 Listening to the Radio--Continued Listening to AM/FM Stations TUNER TUNING Manual Tuning Mode 1 Press the [TUNING MODE] button so that the AUTO indicator disappears from the display. 2 TUNING MODE With the built-in tuner, you can enjoy AM and FM radio stations and store your favorite stations as presets for easy selection. Use the [TUNER] input selector button to select "AM" or "FM". In this example, FM has been selected. Band Frequency Press and hold the TUNING Up or Down [ ]/[ ] button. Press the button repeatedly to change the frequency one step at a time. This model changes FM/AM frequency in 200k/10k (or 50k/9k) Hz steps. Tuning into Weak FM Stereo Stations If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono. Note: You can also use the remote controller's Up and Down [ ]/[ ] buttons to tune the radio. (Actual display depends on country. ) Tuning into AM/FM Radio Stations Auto Tuning Mode 1 Press the [TUNING MODE] button so that the AUTO indicator appears on the display. 2 Press the TUNING Up or Down [ ]/[ ] button. Searching stops when a station is found. When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears. FM STEREO AUTO TUNED 49 Listening to the Radio--Continued Tuning into Stations by Frequency You can tune into AM and FM stations directly by entering the appropriate frequency. Displaying AM/FM Radio Information DISPLAY TUNER Press the [DISPLAY] button to display the available information. Band Number buttons Frequency Preset # D. TUN Listening mode 1 Press the [TUNER] button repeatedly to select "AM" or "FM", followed by the [D. TUN] button. (Actual display depends on country. ) 2 Within 8 seconds, use the number buttons to enter the frequency of the radio station. For example, to tune to 87. 5 (FM), press 8, 7, 5. 50 Listening to the Radio--Continued Presetting AM/FM Stations MEMORY PRESET Selecting Presets PRESET You can store a combination of up to 40 of your favorite AM and FM radio stations. 1 2 Tune into the AM or FM station you want to store as a preset. The preset number flashes. CH +/­ 3 While the preset number is flashing (about 8 seconds), use the PRESET [ ]/[ ] buttons to select a preset from 1 through 40. Number buttons 4 Press the [MEMORY] button again to store the station. Repeat this procedure for all of your favorite stations. AV receiver Deleting Presets MEMORY or Remote controller To select a preset, use the PRESET [ ]/[ ] buttons or the remote controller's CH [+/­] button. You can also use the remote controller's number buttons to select a preset directly. TUNING MODE 1 2 Select the preset that you want to delete. While holding down the [MEMORY] button, press the [TUNING MODE] button. The preset is deleted and its number disappears from the display. or 51 Listening to SIRIUS Satellite Radio Listening to Sattellite Radio To listen to Satellite Radio, you'll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your Sirius-Ready receiver. SIRIUS Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada. Satellite Radio delivers a variety of commercial-free music from categories ranging from Pop, Rock, Country, R&B, Dance, Jazz, Classical and many more plus coverage of all the top professional and college sports including play by play games from select leagues and teams. Additional programming includes expert sports talk, uncensored entertainment, comedy, family programming, local traffic and weather and news from your most trusted sources. Once you've purchased a SIRIUS tuner you'll need to activate it and subscribe to begin enjoying the service. [. . . ] The functions don't work · To use , you must make an connection and an analog audio connection (RCA) between the component and AV receiver, even if they are connected digitally (page 37). When performing "Audyssey 2EQTM Room Correction and Speaker Setup", the measurement fails showing the message "Ambient noise is too high". Check if the unit produces normal sounds. Dock for iPod There's no sound · Make sure your iPod is actually playing. · Make sure the Dock is connected to the PORT jacks on the AV receiver. [. . . ]