User manual ONKYO TA-RW11 service manual

[. . . ] Noise reduction of 20 dB at 5 kHz possible with Dolby C. Input Jacks: LINE IN: 2 Input sensitivity: 80 mV Input impedance: 50 k ohm Output Jacks: LINE OUT: 2 Standard output level: 500 mV Output load impedance:over 50 k ohm Motors: DC servo motor: 1+1 Heads: PB Head: Special Hard Permalloy x 1 Rec/PB Head: Special Hard Permalloy x 1 Erase head: Ferrite x 1 Power supply rating: North American: AC 120 V, 60 Hz European: AC 230 - 240 V, 50 Hz Power consumption: 17 W Standby power consumption: North American: 7. 0 W European: 0. 6 W Dimensions: (W x H x D): 435 mm x 121 mm x 303 mm (17-1/8" x 4-3/4" x 11-15/16") Weight: 4. 9 kg (10. 8 lbs. ) Operation condition temperature/humidity: 5 C - 35 C/ 5% - 85% (no condensation) Specifications and external appearance are subject to change without notice because of product improvements. TA-RW11 EXPLODED VIEW P102 Z009 x 4 pcs. A013 Except <MDD> A017 A315 A317 A308 A307 A306 x 3 pcs. A019 x 2 pcs. A312 x 4 pcs. TA-RW11 TA-RW11 EXPLODED VIEW F567-750 F REC CASSETTE MECHANISM Z001 : CMAL2Z226B (PLAY Deck) Z002 : CMAL2Z227B (REC/PLAY Deck) 05a 30 F567-739 05b PACK Cr METAL PACK Cr R REC 04 A A 06 A A CMAL2Z226B Lever for prevent to lever. (only Left side mecha. ) A 25 A 29 A 42 A A 02 A B F513-930 32 B CMAL2Z227B Lever for prevent to eject (Both mecha. ) F513-931 03a 03b A : MOLYKOTE EM-60L : CORNING B : SCREW LOCK : BOND 31 TA-RW11 TA-RW11 CASSETTE MECHA. [. . . ] Output Level (3) 10 : 10 kHz : 1 kHz : 100 Hz VCC = 14 V, RPIin, RECmode RECOUT, 0 dB = 300 mVrms, 25 Hz HPF, 80 kHz LPF, NR-C Total Harmonic Distortion T. H. D. (%) 1. 0 0. 1 0. 01 ­15 ­10 ­5 0 5 10 15 Output Level Vout (dB) Total Harmonic Distortion vs. (%) : 10 kHz : 1 kHz : 100 Hz 1. 0 VCC = 14 V, RPIin, PBmode PBOUT, 0 dB = 775 mVrms, 25 Hz HPF, 80 kHz LPF, NR-OFF 0. 1 0. 01 ­15 ­10 ­5 0 5 10 15 Output Level Vout (dB) 40 HA12167FB/HA12169FB Total Harmonic Distortion vs. (%) : 10 kHz : 1 kHz : 100 Hz 1. 0 VCC = 14 V, RPIin, PBmode PBOUT, 0 dB = 775 mVrms, 25 Hz HPF, 80 kHz LPF, NR-B 0. 1 0. 01 ­15 ­10 ­5 0 5 10 15 Output Level Vout (dB) Total Harmonic Distortion vs. Output Level (6) 10 : 10 kHz : 1 kHz : 100 Hz Total Harmonic Distortion T. H. D. (%) VCC = 14 V, RPIin, PBmode PBOUT, 0 dB = 775 mVrms, 25 Hz HPF, 80 kHz LPF, 1. 0 NR-C 0. 1 0. 01 ­15 ­10 ­5 0 5 10 15 Output Level Vout (dB) 41 HA12167FB/HA12169FB Maximum Output Level vs. Supply Voltage (1) HA12167FB 20 : NR-OFF : NR-B : NR-C Maximum Output Level vs. Supply Voltage (2) HA12167FB 20 : NR-OFF : NR-B : NR-C Maximum Output Level Vo max (dB) 15 Maximum Output Level Vo max (dB) 15 10 RECmode, RECOUT RPIin, f = 1 kHz 0 dB = 300 mVrms T. H. D. = 1% 5 8 10 12 14 16 Supply Voltage VCC (V) 10 PBmode, PBOUT RPIin, f = 1 kHz 0 dB = 775 mVrms T. H. D. = 1% 5 8 10 12 14 16 Supply Voltage VCC (V) Maximum Output Level vs. Supply Voltage (3) HA12169FB 20 : NR-OFF : NR-B : NR-C Maximum Output Level vs. (dB) RECVol, VRI3in, EQOUTout I. DAC = 0, EQ, DAC = 0 C VCC = 14 V B 0 ­20 ­40 ­60 OFF ­80 10 100 1k 10 k 100 k 1M Frequency (Hz) Ripple Rejection Ratio vs. (dB) 0 PBVol, VRI3in, PBOUTout I. DAC = 0, VCC = 14 V ­10 ­20 OFF ­30 C B ­40 ­45 10 100 1k 10 k 100 k 1M Frequency (Hz) 49 HA12167FB/HA12169FB Input Volume Gain vs. DAC Step (1) HA12167FB 40 20 Input Volume Gain (dB) 0 ­20 VCC = 14 V, RECVol f = 1 kHz VRI1in, PBOUTout 80 kHz LPF, 400 Hz HPF ­40 ­60 0 10 20 30 DAC Step 40 50 60 Input Volume Gain vs. DAC Step (2) HA12167FB 35 Input Volume Gain (dB) 30 25 20 VCC = 14 V, PBVol f = 1 kHz VRI2in, PBOUTout 80 kHz LPF, 400 Hz HPF 15 0 10 20 30 DAC Step 40 50 60 50 HA12167FB/HA12169FB Input Volume Gain vs. DAC Step (3) HA12169FB 40 20 Input Volume Gain (dB) 0 ­20 VCC = 14 V, RECVol f = 1 kHz VRI1in, PBOUTout 80 kHz LPF, 400 Hz HPF ­40 ­60 0 10 20 30 DAC Step 40 50 60 Input Volume Gain vs. DAC Step (4) HA12167FB 35 Input Volume Gain (dB) 30 25 20 VCC = 14 V, PBVol f = 1 kHz VRI2in, PBOUTout 80 kHz LPF, 400 Hz HPF 15 0 10 20 30 DAC Step 40 50 60 51 HA12167FB/HA12169FB Signal to Noise Ratio vs. DAC Step (1) 75 Signal to Noise Ratio S/N (dB) DIN-AUDIO 80 CCIR-ARM 85 JIS-A 90 VCC = 14 V, RECVol VRI1in, PBOUTout 95 0 10 20 30 40 DAC Step 50 60 Signal to Noise Ratio vs. DAC Step (2) 60 Signal to Noise Ratio S/N (dB) 65 70 CCIR-ARM DIN -AU 75 JIS-A VCC = 14 V, PBVol VRI2in, PBOUTout DIO 80 0 10 20 30 40 DAC Step 50 60 52 HA12167FB/HA12169FB Maximum Output Voltage vs. DAC Step (1) HA12167FB Maximum Output Voltage Vo max (dB) (0dB = 775 mVrms) 20 15 10 5 VCC = 14 V RECVol, f = 1 kHz VRI1in, PBOUTout T. H. D. = 1 % 80 kHz LPF, 400 Hz HPF 10 20 30 DAC Step Maximum Output Voltage vs. DAC Step (2) HA12167FB 40 50 60 0 Maximum Output Voltage Vo max (dB) ( dB = 775 mVrms) 20 15 10 5 VCC =14 V PBVol, f=1 kHz VRI2in, PBOUTout T. H. D. =1% 80 kHz LPF, 400 Hz HPF 0 10 20 30 DAC Step 40 50 60 53 HA12167FB/HA12169FB Maximum Output Voltage vs. [. . . ] No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg. , 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor. hitachi. com/ Europe : http://www. hitachi-eu. com/hel/ecg Asia (Singapore) : http://www. has. hitachi. com. sg/grp3/sicd/index. htm Asia (Taiwan) : http://www. hitachi. com. tw/E/Product/SICD_Frame. htm Asia (HongKong) : http://www. hitachi. com. hk/eng/bo/grp3/index. htm Japan : http://www. hitachi. co. jp/Sicd/indx. htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose, CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. [. . . ]