User manual ONKYO TX-903

[. . . ] 7 Facilities and connections Front panel facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Connecting a graphic equalizer and power amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Setting OSD menu STANDBY DISPLAY ZONE 2 ( GRN ) REC ( RED ) DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 TAPE 1 TAPE 2 AM FM PHONO CD OPEN/CLOSE POWER ON OFF AV RECEIVER TX-903 The On-Screen Display (OSD) menu . . . . . . . . . . . . 48 About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Input Setup menu This menu allows you to setup the various input sources available with the TX-903. Each input source may have a great number of settings that are difficult to keep track of, so we recommend making a chart to record what you have set and for which component to prevent confusion later. 2-1. Digital Setup sub-menu The settings made in this sub-menu are valid for the input source that is currently selected with the input source buttons at the front panel and, therefore, these settings are made separately for each digital input source. This sub-menu will not appear if the Multichannel setting in the Multichannel Setup sub-menu is set to "On" for the selected input source, or if the selected input source button is AM, FM, or PHONO. If this setting is incorrectly made, the digital audio signals may not be properly output, or not heard at all. Menu 123456789012345678901234 11. Speaker Setup 2. Input Setup 22. Input Setup Input:VIDEO1 33. Listening Mode Setup 4. Preference Setup 2-1. DigitalSetup 45. Zone2 OSDSetup 1. Digital Input:VIDEO1 56. About 2. Multichannel Setup 6 3. Video Setup a. Digital Mode 7 4. ListeningInput Preset 8 5. Sound Effect:OPT1 Select: 9 6. CharacterExit:|EXIT| Input Enter:|ENTER|Format b. Digital Quit:|OSD| 0 7. Miscellaneous Setup :Auto 1 2 Quit:|OSD| Quit:|OSD| Menu 123456789012345678901234 11. Speaker Setup 2. Input Setup 22. Input Setup Input:VIDEO1 33. Listening Mode Setup 4. Preference 45. Zone2 OSDSetup 1. Digital Setup 56. About 2. Multichannel Setup 6 3. Video Setup 7 4. Listening Mode Preset 8 5. Delay Select: Exit:|EXIT| 9 6. Sound Effect Enter:|ENTER| Input 0 7. Character Quit:|OSD| 1 8. Miscellaneous Setup 2 Quit:|OSD| Current Input Source a. Digital Input This setting tells the TX-903 which input source button on the front panel is connected with which digital input jack on the rear panel. To perform this setting, you must first select a digital input source at the front panel and then set the name of the digital input jack it is connected to here. For example, if the input source selected at the front panel is CD and the compact disc player is connected to OPTICAL IN 1, then select "OPT1" here. If the input source selected is not connected to a digital input, then select "----. " OPT1: Select if connected to DIGITAL INPUT (OPTICAL) 1. ­ ­ ­ ­: Select if the input source is not from a digital input jack. Digital Format The default setting is "Auto. " If "----" is selected for this input source at the Digital Input setting, then this setting will not appear. This prevents noise when you operate the PAUSE or SKIP button on the player. Therefore, if the source is immediately switched from DTS to PCM, the PCM signal may not be played. In this case, stop the playback of the source on the player for about three seconds and then resume playback. 35 Input Setup 2-2. Multichannel Setup sub-menu This sub-menu will not appear if AM, FM, or PHONO is selected at the front panel for the input source. This setting is normally set to "No, " and only needs to be changed to "Yes" if a DVD player, MPEG decoder, or other component that has a multi channel port is connected to the MULTI CHANNEL INPUT port for 5. 1channel or 7. 1-channel audio. For example, if a DVD player is connected to the MULTI CHANNEL INPUT port, then select DVD at the front panel as the input source, bring up this sub-menu, and select "Yes" for the Multichannel setting. When "Yes" is selected, the audio from the MULTI CHANNEL INPUT is given preference. Menu 123456789012345678901234 11. Speaker Setup 2. Input Setup 2. Input Setup 23. Listening Mode Setup Input:DVD 34. Preference 123456789012345678901234 412-2. Multichannel Setup 1. Digital Setup 5. Zone2 OSDSetup Input:DVD 52 2. Multichannel Setup 6. About Setup 63 3. Video 74 4. Listening Mode Preset 85 5. Sound Effect Select: a. Multichannel :Yes 96 6. CharacterExit:|EXIT| Input Enter:|ENTER| Quit:|OSD| 07 7. Miscellaneous Setup 18 29 Quit:|OSD| 0 1 Quit:|OSD| 2 The default settings are given below. Input source selected CD PHONO FM AM TAPE1 TAPE2 DVD VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 Video Last valid Last valid Last valid Last valid Last valid Last valid DVD VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 Last valid: When you change to an input source set to "Last valid, " the video of the input source that you changed from is continued. For example, if the selected input source is VIDEO 1, and you then change to CD (set to "Last valid"), then the audio from the CD input is played while the video from VIDEO 1 continues. Component If a component is connected to the one of the COMPONENT VIDEO inputs (1, 2, or 3), then that input must be set here. This setting will not appear if AM, FM, PHONO, CD, TAPE1, or TAPE2 is selected as the input source. The default settings are given below. Input source selected DVD VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 Setting COMPONENT VIDEO 1 ---COMPONENT VIDEO 2 COMPONENT VIDEO 3 ------- 2-3. [. . . ] Master ID: Unlocked _____________________ 71 Your system setting This page is for you to record the settings you have made for the components connected to the TX-903. If a system installer will install your system for you, then ask him to fill in this page for you. Example: If you connected a Onkyo DV-S525 to the DVD input, then enter "ONKYO DV-S525" for the name, circle items corresponding to the connections and settings that you have made, and fill in the items where blanks are given. VIDEO 2 Name: Digital Input: OPT1, OPT2, OPT3, COAX1, COAX2, COAX3, COAX4, COAX5, not connected Yes, No DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, not connected INPUT1, INPUT2, INPUT3, not connected VIDEO1, VIDEO2, COMPONENT, not connected DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, ---__________dB Yes (name:_________________) , No ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ Inputs DVD Name: Digital Input connection: OPT1, OPT2, OPT3, COAX1, COAX2, COAX3, COAX4, COAX5, not connected Multichannel Setup: Yes, No Video Input Video: DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, not connected Component Video: INPUT1, INPUT2, INPUT3, not connected Video Output: VIDEO1, VIDEO2, COMPONENT, not connected Video Setup: DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, ---Intelli Volume: __________dB Character Input: Yes (name:_________________) , No Listening Mode Preset 1. Input source signal: ________________________________ Listening Mode: ________________________________ 2. [. . . ]