User manual ONKYO TX-DS787

[. . . ] Contents AV Receiver Before using 2 TX-DS787 Instruction Manual Facilities and connections 8 Setting OSD menu 28 Enjoying music or videos Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. 48 Remote controller 58 Appendix 70 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] You can only select Multichannel with the AUDIO SELECTOR button when "Yes" is selected here. Note: When playing a device that is actually connected to the MULTI CHANNEL INPUT terminal, select Multichannel with the AUDIO SELECTOR button. 35 Input Setup 2-2. Component If a component is connected to the one of the COMPONENT VIDEO inputs (1 or 2), then that input must be set here. This setting will not appear if AM, FM, PHONO, CD or TAPE is selected as the input source. The default settings are given below. Input source selected CD PHONO FM AM TAPE VIDEO 4 VIDEO 3 VIDEO 2/VCR 2 VIDEO 1/VCR 1 DVD Component video input Menu 1. Speaker Setup 2. Input Setup 2. Input Setup Input:DVD 3. Listening Mode Setup 4. Preference 2-2. Video a. Audio Setup 5. OSD Setup Setup Input:DVD b. Video Setup c. Listening Mode Preset a. Video d. Tone Control:DVD e. IntelliVolume b. ComponentQuit:|OSD| f. 12V TriggerVideo |ENTER| :Input1 |ENTER| Quit:|OSD| Quit:|OSD| ---INPUT 2 ------INPUT 1 a. Video This setting allows you to match the audio from one component with the video from another. Therefore, you can set a video source to be displayed while the audio from another input source is heard. For example, this allows you to play the music from a compact disc, while displaying the picture from a video cassette player or other video source. The default settings are given below. Input source selected CD PHONO FM AM TAPE DVD VIDEO1 VIDEO2 VIDEO3 VIDEO4 Video Last Last Last Last Last DVD VIDEO1 VIDEO2 VIDEO3 VIDEO4 ---- : Not assigned with the default settings. Last : When you change to an input source set to "Last, " the video of the input source that you changed from is continued. For example, if the selected input source is VIDEO 1, and you then change to CD (set to "Last"), then the audio from the CD input is played while the video from VIDEO 1 continues. · If no video signal is to be assigned to the input source, set "----. " 36 Input Setup 2-3. Listening Mode Preset sub-menu With the TX-DS787, you can set a different listening mode for each different signal type that comes from each input source and also set the parameters for the listening mode itself. For example, if your DVD player also plays compact discs and the DVD video signal is DTS and the compact disc signal is PCM, then you can set a different listening mode for each. This is especially convenient if you frequently play the same types of movies or music. Menu 1. Speaker Setup 2. Input Setup 2. Input Setup Input:DVD 3. Listening Mode Setup 4. Preference a. Audio Setup 2-3. ListeningMode Preset 5. OSD Setup b. Video Setup Input:DVD c. Listening Mode Preset d. Tone Source a. 2ch Control e. IntelliVolume :Stereo f. 12V Trigger |ENTER| Quit:|OSD| b. PCM fs=96k :Stereo |ENTER| Quit:|OSD| c. Multichannel, Mono Source :Surround Quit:|OSD| Input source signals a. 2ch Source Set a listening mode for the input signal from 2-channel analog sources, PCM sources, and 2/0-channel Dolby Digital and DTS sources. PCM fs=96k Set a listening mode for the input signal from digital PCM sources recorded with a sampling rate of 96 kHz. Multichannel, Mono Source Set a listening mode for the input signal from 2/1, 2/2, 3/0, 3/2channel Dolby Digital and DTS sources. Or, set a listening mode for the input signal from 1/0-channel (Mono) Dolby Digital and DTS sources. · The TX-DS787 will automatically switch to the listening mode set for the current input signal. For example, even when using the same DVD player, if a CD is played, the listening mode automatically becomes "Stereo, " and if a DVD is played (Dolby Digital 3/2. 1), the listening mode automatically becomes Dolby D. * The 5. 1-channel digital surround format has a variety of versions including Dolby Digital and DTS. The 5. 1- channel digital surround format enables you to individually record and play five full-range (20 Hz to 20 kHz) channels (left and right front, center, and two surround channels) plus an LFE channel (Low Frequency Effect) for the low-range effect sound. It will create a realistic sound that can be heard in the theaters and concert halls. Relationship between input source and listening mode Input source signal (display) Type of software 2ch Tape, CD, Record, Tuner DVD Video (Stereo), LD (Stereo) Digital satellite broadcast G G G G (Pro Logic (3 Stereo), DolbyD, DTS) G (Cinema) G G G G G G G PCM fs=96k DVD Multichannel, Mono DVD, LD, Digital satellite broadcast DTS-CD Listening Mode Direct Stereo Theater-Dimensional Surround G G THX Mono Movie Enhanced 7 Orchestra Unplugged Studio-Mix TV Logic All Ch Stereo G G G (DolbyD, Dolby D/6. 1, DTS, DTS-ES) G (Cinema, Surround EX) G G G G G G The listening modes that can be set are different for each input source format. [. . . ] © Point the remote controller at the remote sensor of the TX-DS787. · Remote controller is functioning in a different mode © Press the AUDIO MODE button. For digital sources, sound is sometimes not output depending on media type. · Format of digital input source is fixed. © Set Digital Format to "All" in the Audio Setup sub-menu of the Input Setup menu (page 35). For DTS and PCM sources, noises or incorrect starts occur when the digital source is played. · Digital Format settings is incorrect. © Try setting Digital Format to the same as the input source in the Audio Setup sub-menu of the Input Setup menu (page 35). Operation of fan is heard. · TX-DS787 is equipped with internal ventilation fan to prevent overheating. [. . . ]