User manual ONKYO TX-DS797

[. . . ] Contents AV Receiver Before using 2 TX-DS797 Instruction Manual Facilities and connections 8 Setup and operation 26 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote controller 56 Appendix 71 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Component Video If a component is connected to the one of the COMPONENT VIDEO inputs (1 or 2), then that input must be set here. The default settings are given below. Input source selected CD PHONO FM AM TAPE DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 Component video input Last Valid Last Valid Last Valid Last Valid Last Valid INPUT 1 INPUT 2 INPUT 2 INPUT 2 INPUT 2 INPUT 2 Quit:|SETUP| a. Video This setting allows you to match the audio from one component with the video from another. Therefore, you can set a video source to be displayed while the audio from another input source is heard. For example, this allows you to play the music from a compact disc, while displaying the picture from a video cassette player or other video source. The default settings are given below. Input source selected CD PHONO FM AM TAPE DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 Video Last Valid Last Valid Last Valid Last Valid Last Valid DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 Last Valid (enables the source last selected): The source that was selected last continues as the input source. Last Valid: When you change to an input source set to "Last Valid, " the video of the input source that you changed from is continued. For example, if the selected input source is VIDEO 1, and you then change to CD (set to "Last Valid"), then the audio from the CD input is played while the video from VIDEO 1 continues. · If no video signal is to be assigned to the input source, set "----. " 35 Input Setup 2-4. Character Input sub-menu This sub-menu allows you to give names to the stations you have preset for the AM/FM tuner, and to the input sources you have connected (excluding the tuner itself). For example, if you have a DVD connected to the VIDEO4 input jack, then you can give it the name "DVD2. " Or, if you have multiple VCRs connected, you can enter the model names or manufacturer names for each one so that you do not have to remember which is connected to which input source. If you want to enter a name for a preset broadcast radio station, select the station that you want to name and enter the name. Using the cursor buttons, select the desired character and press the ENTER button. To change a character, move the cursor backward with the RETURN button or forward with the ENTER button to the location of mistaken character and enter the desired character. After completing the name, to exit, repeatedly press the ENTER button. Continue until the name is finished or until you have reached 10 characters. 2-5. Intelli Volume sub-menu This sub-menu allows you to set some of the special features offered by the TX-DS797. Advanced Menu 2. Input Setup Input:DVD 2-4. Character Input Input:DVD a. Character Display :No b. Character : Press to edit. Quit:|SETUP| Advanced Menu 2. Input Setup Input:DVD 2-5. IntelliVolume Setup Input:DVD a. IntelliVolume : 0dB Quit:|SETUP| a. Character Display Yes: Select to display the name you enter when the input source is selected. Character If you have selected "Yes" for the Character Display above, then here you can enter the name that you want to display. At the Character Input screen, press the cursor buttons to move the cursor to the desired character and then press the ENTER button. Continue until the name is finished or until you have reached 10 characters. a. Intelli Volume When switching input sources, you may find that the output level for different components or input sources connected to the TX-DS797 is different even though the main volume setting is the same. [. . . ] © Move inferring objects away from path of remote controller signals. If one of the messages shown below appears "Not available with headphones use" The operation is not allowed because headphones are plugged into the TX-DS797. "Not available with Multichannel use" Cannot be used while the multi-channel output is being used. "Not available in this Sp Config" Will not work with the current speaker configuration settings. "Not available in Zone 2 mode" The operation is not allowed because the Zone 2 mode is turned on. [. . . ]