User manual ONKYO TX-DS898

[. . . ] Contents AV Receiver Before using 2 TX-DS898 Instruction Manual Facilities and connections 8 Setup and operation 26 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote controller 55 Appendix 70 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] For example, this allows you to play the music from a compact disc, while displaying the picture from a video cassette player or other video source. The default settings are given below. Input source selected CD PHONO FM AM TAPE DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 Video Last Valid Last Valid Last Valid Last Valid Last Valid DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 Last Valid (enables the source last selected): The source that was selected last continues as the input source. Last Valid: When you change to an input source set to "Last Valid, " the video of the input source that you changed from is continued. For example, if the selected input source is VIDEO 1, and you then change to CD (set to "Last Valid"), then the audio from the CD input is played while the video from VIDEO 1 continues. · If no video signal is to be assigned to the input source, set "----. " 35 Input Setup 2-4. Character Input sub-menu This sub-menu allows you to give names to the stations you have preset for the AM/FM tuner, and to the input sources you have connected (excluding the tuner itself). For example, if you have a DVD connected to the VIDEO4 input jack, then you can give it the name "DVD2. " Or, if you have multiple VCRs connected, you can enter the model names or manufacturer names for each one so that you do not have to remember which is connected to which input source. If you want to enter a name for a preset broadcast radio station, select the station that you want to name and enter the name. Using the cursor buttons, select the desired character and press the ENTER button. To change a character, move the cursor backward with the RETURN button or forward with the ENTER button to the location of mistaken character and enter the desired character. After completing the name, to exit, repeatedly press the ENTER button. Continue until the name is finished or until you have reached 10 characters. 2-5. Intelli Volume sub-menu This sub-menu allows you to set some of the special features offered by the TX-DS898. Advanced Menu 2. Input Setup Input:DVD 2-4. Character Input Input:DVD a. Character Display :No b. Character : Press to edit. Quit:|SETUP| Advanced Menu 2. Input Setup Input:DVD 2-5. IntelliVolume Setup Input:DVD a. IntelliVolume : 0dB Quit:|SETUP| a. Character Display Yes: Select to display the name you enter when the input source is selected. Character If you have selected "Yes" for the Character Display above, then here you can enter the name that you want to display. At the Character Input screen, press the cursor buttons to move the cursor to the desired character and then press the ENTER button. Continue until the name is finished or until you have reached 10 characters. a. Intelli Volume When switching input sources, you may find that the output level for different components or input sources connected to the TX-DS898 is different even though the main volume setting is the same. Under normal circumstances, you would then have to change the volume setting each time you change the input source. This Intelli Volume setting allows you to preset a volume level for each input source separately so that when you do switch from one input source to another, the TX-DS898 adjusts the volume accordingly so that the resulting volume stays the same. To set the Intelli Volume, simply select an input source at the front panel, and if that source is quieter than other sources, increase its decibel level with the cursor button, or if it is louder than other sources, decrease its decibel level with the cursor button. The Intelli Volume can be adjusted between ­12 and +12 decibels. Advanced Menu 2. Input Setup Input:DVD 2-4. Character Input Input:DVD b. Character : ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz |ENTER| 0123456789-. ' Back: ()+*/=, :;!?_ |RETURN| 36 Input Setup 2-6. [. . . ] · Remote controller is functioning in a different mode © Press the RCVR MODE button. "Only available with Dolby D" No setting other than Dolby Digital can be set. "Not available in this Listening mode" Will not work with the current listening mode. "Not available with this signal" The listening mode cannot be selected with the current input source. [. . . ]