User manual ONKYO TX-DS989

[. . . ] Contents Before using AV Receiver TX-DS989 Instruction Manual MASTER VOLUME STANDBY/ON Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Digital Format The default setting is "Auto. " If "----" is selected for this input source at the Digital Input setting, then this setting will not appear. Although you can use this default setting as is, you may change it as desired depending on the input signal format (e. g. , if you know that you will always be listening to a certain input signal format from a particular input source). 34 Input Setup Auto: Select for automatic detection of the input signal format. The input signal format (Dolby Digital, DTS, MPEG, PCM or Analog) used by the selected input source is detected automatically to execute the required decoding process. If no digital signal is input, the input signals to the analog input jacks will be played. AC-3RF: Select if a LD player with an AC-3RF terminal is connected to the AC-3RF input on the TX-DS989. AC-3RF can only be selected if VIDEO 4 is selected as the input source. Digital: Select for automatic detection of a digital input signal format. The input digital signal format (Dolby Digital, DTS, MPEG, or PCM) used by the selected digital input source is detected automatically to execute the necessary decoding process. Analog: Regardless of whether the component is also digitally connected, the audio signals input from the component through the analog input jacks are played. · You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the TX-DS989 digitally. This is because the digital signal has been processed (such as the output level, sampling frequency, or frequency response) and the TX-DS989 cannot recognize the signal as DTS data. Therefore you may hear noise when you play a DTS source while processing the signal. · The outputs for the VIDEO 1 OUT, VIDEO 2 OUT, TAPE 1 OUT, and TAPE 2 OUT output analog audio signals. If you do, the DTS-encoded signal will be recorded as noise. Notes: · If "Auto" or "Digital" is selected and a compact disc or LD is fast-forwarded during playback, decoded PCM signals may produce a skipping sound. In such cases, change the setting to "PCM. " · If a compact disc or LD encoded in the DTS format is played back with "PCM" selected, only noise will be produced. Always select "Auto, " "Digital, " or "DTS" when playing back DTS-encoded sources. Notes on DTS: · If you play a CD or LD that supports DTS when the "PCM" setting is selected on the TX-DS989, the DTS encoded signal will not be decoded and noise will be output. Therefore, be sure to selected "Auto, " "Digital, " or "DTS" and use the digital input jacks (OPTICAL or COAXIAL) to connect the DTS source. · If you play a CD or LD that supports DTS when the "Auto" or "Digital" setting is selected, you may hear a noise for a short while until the DTS decoder recognizes the DTS-encoded signal and starts operating. · If you press the PAUSE or SKIP button on the player while playing a DTS source, a short noise may be heard. In such cases, try playing the source in the "DTS" selected. · The DTS indicator on the TX-DS989 lights while a DTS source is played. [. . . ] Input source signal: ________________________________ Listening Mode: ________________________________ 3. Input source signal: _______________________________ Listening Mode: ________________________________ Multichannel Setup: Video Input Video: Component Video: Video Output: Video Setup: Intelli Volume: Character Input: Listening Mode Preset 1. Input source signal: Listening Mode: VIDEO 3 Name: Digital Input: OPT1, OPT2, OPT3, COAX1, COAX2, COAX3, COAX4, COAX5, not connected Yes, No DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, not connected INPUT1, INPUT2, INPUT3, not connected VIDEO1, VIDEO2, COMPONENT, not connected DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, ---__________dB Yes (name:_________________) , No ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ Multichannel Setup: Video Input Video: Component Video: Video Output: VIDEO 1 Name: Digital Input: OPT1, OPT2, OPT3, COAX1, COAX2, COAX3, COAX4, COAX5, not connected Yes, No DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, not connected INPUT1, INPUT2, INPUT3, not connected VIDEO1, VIDEO2, COMPONENT, not connected DVD, VIDEO1, VIDEO2, VIDEO3, VIDEO4, VIDEO5, ---__________dB Yes (name:_________________) , No ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ Video Setup: Intelli Volume: Character Input: Listening Mode Preset 1. Input source signal: Listening Mode: Multichannel Setup: Video Input Video: Component Video: Video Output: Video Setup: Intelli Volume: Character Input: Listening Mode Preset 1. [. . . ]