User manual ONKYO TX-NR3010

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, PORTABLE CART WARNING tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] – Dolby EX Auto: If the source signal contains a Dolby EX flag, the Dolby EX or THX Surround EX listening mode is used. This setting is unavailable if no surround back speakers are connected. This setting is effective with Dolby Digital, Dolby Digital Plus and Dolby TrueHD only. Note • If the “Surround Back” setting is set to “None” (➔ page 67), this setting cannot be selected. € If the “Powered Zone 2/3” setting is set to “Yes” and Zone 2 is turned on, this setting cannot be selected. € When the “Speakers Type(Front A)” setting is set to “Bi-Amp” or “Digital Crossover”, this setting cannot be selected if the “Powered Zone 2” setting is set to “Yes” and Zone 2 is turned on. € If the “Front High” or “Front Wide” setting is enabled (➔ page 67), this setting is fixed to “Manual”. – Dolby Volume Off On Dolby Volume automatically adjusts the difference in volume levels which can occur between different contents or source components, freeing the user from having to make volume adjustments. Also, by adjusting the frequency balance according to the playback volume, it recreates the original source audio. Dolby Volume therefore provides comfortable listening, effectively controlling the volume level difference without unnatural changes in volume or sound quality to recreate the balance and nuance of the source audio. note • When the “Dolby Volume” setting is set to “On” , “Dynamic EQ” and “Dynamic Volume” will be set to “Off”. € If you would like to use Dolby Volume in THX listening modes, set the “Loudness Plus” and “Preserve THX Settings” settings to “Off” and “No”, respectively. € When “Dolby Volume” is set to “On”, the Late Night function cannot be set. – TrueHD Loudness Management Off On This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source. Note • When this setting is set to “Off”, the Late Night function for Dolby TrueHD sources is automatically fixed to “Off”. € When this setting is set to “Off”, the Dialogue Normalization information is not available for Dolby TrueHD sources. This setting affects volume the most, causing all sounds to be of equal loudness. €Volume Leveler” maintains the perceived loudness of all contents, coming from different channels or input sources. Note • If the “Dolby Volume” setting is set to “Off”, this setting cannot be selected. en-73 Advanced Operations ■ Half Mode Off On The Half Mode parameter turns Dolby Volume Half Mode processing on and off. In off mode, Dolby Volume applies a bass and treble attenuation to the audio when the system gain exceeds reference level. This enables a more perceptually flat listening experience as human ears are more sensitive to bass and treble at higher levels. [. . . ] Profile: You can play tracks from “Recently Listened Tracks”, “Library” and “Neighbours”. 3 Use q/w to select a station , and press ENTER or 1 to start playback. Enabled buttons: 1, 2, 6 ■ Menu Items I Love this track: Track information is saved in Last. Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). [. . . ]