User manual ONKYO TX-NR525

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, PORTABLE CART WARNING stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by selecting the correct frequency response and surround volume levels moment-by-moment so that the content sounds the way it was created at any volume level — not just at reference level. – Reference Level Audyssey Dynamic EQ Reference Level Offset 0 dB: This should be selected for movie contents. 5 dB : Select this setting for content that has a very wide dynamic range, such as classical music. 10 dB: Select this setting for jazz or other music that has a wider dynamic range. This setting should also be selected for TV content as that is usually mixed at 10 dB below film reference. 15 dB: Select this setting for pop/rock music or other program material that is mixed at very high listening levels and has a compressed dynamic range. To achieve the same reference level in a home theater system each speaker level must be adjusted so that –30 dBFS band-limited (500 Hz to 2000 Hz) pink noise produces 75 dB sound pressure level at the listening position. a home theater system automatically calibrated by Audyssey MultEQ will play Operating procedure (➔ page 44) Note • For best results , we recommend setting “Narrow” to 20° and “Wide” to 40°. En-49 Advanced Operations at reference level when the master volume control is set to the 64 position. audyssey Dynamic EQ® is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 64. However, film reference level is not always used in music or other non-film content. Audyssey Dynamic EQ Reference Level Offset provides three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard. Note • If “Dynamic EQ” setting is set to “Off”, this technology cannot be used. About Audyssey Dynamic EQ® Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Dynamic EQ selects the correct frequency response and surround levels moment-by-moment at any user-selected volume setting. The result is bass response, tonal balance and surround impression that remain constant despite changes in volume. Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for delivering a loudness correction solution. Audyssey Dynamic EQ works in tandem with Audyssey MultEQ® to provide wellbalanced sound for every listener at any volume level. About Audyssey Dynamic Volume® Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. [. . . ] Profile: You can play tracks from “Recently Listened Tracks”, “Library” and “Neighbours”. 3 Use q/w to select a station , and press ENTER or 1 to start playback. Enabled buttons: 1, 2, 6 ■ Menu Items I Love this track: Track information is saved in Last. Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). [. . . ]