User manual ONKYO TX-NR626

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, PORTABLE CART WARNING stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel. Changing the value from “0” to “5” will spread the sound of the center channel to left and right (outwards). note • For best results , we recommend setting “Narrow” to 20° and “Wide” to 40°. – Dolby EX Auto: If the source signal contains a Dolby EX flag, the Dolby EX listening mode is used. This setting is unavailable if no surround back speakers are connected. This setting is effective with Dolby Digital, Dolby Digital Plus and Dolby TrueHD only. Note • If the “Surround Back” setting is set to “None” (➔ page 56), this setting cannot be selected. € If the “Powered Zone 2” setting is set to “Yes” and Zone 2 is turned on, this setting cannot be selected. € If the “Front High” setting is enabled (➔ page 56), this setting is fixed to “Manual”. To enable the following settings, you must first perform the Room Correction and Speaker Setup (➔ page 24). € These technologies cannot be used when a pair of headphones is connected. Note • When “Audyssey Quick Start” has been used for measurement, “Audyssey” cannot be selected. Theater-Dimensional ■ Listening Angle Wide: Select if the listening angle is greater than 30 degrees. With this setting, you can optimize the TheaterDimensional listening mode by specifying the angle of the front left and right speakers relative to the listening position. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the two available settings. Front left speaker Front right speaker Listening angle: 30° ■ TrueHD Loudness Management Off On This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source. Note • When this setting is set to “Off”, the Late Night function for Dolby TrueHD sources is automatically fixed to “Off”. With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by selecting the correct frequency response and surround volume levels moment-by-moment so that the content sounds the way it was created at any volume level — not just at reference level. – Reference Level Audyssey Dynamic EQ Reference Level Offset 0dB: This should be selected for movie contents. 5dB: Select this setting for content that has a very wide dynamic range, such as classical music. [. . . ] Profile: You can play tracks from “Recently Listened Tracks”, “Library” and “Neighbours”. 3 Use q/w to select a station , and press ENTER or 1 to start playback. Enabled buttons: 1, 2, 6 ■ Menu Items I Love this track: Track information is saved in Last. Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). [. . . ]