User manual ONKYO TX-SR700E

[. . . ] Contents AV Receiver Before using 2 TX-SR700/700E TX-SR600/600E Facilities and connections 8 Instruction Manual Setup and operation 36 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote controller 63 Appendix 76 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Use the and cursor buttons to select "Center" and then use the and cursor buttons to select the center speaker setting. · If "Small" is selected for the Front setting, "Large" cannot be selected for this setting. Use the and cursor buttons to select "Surround" and then use the and cursor buttons to select the surround speaker setting. Large: Select if the surround left and right speakers are large sized. Small: Select if the surround left and right speakers are small sized. · If "Small" is selected for the Front setting, "Large" cannot be selected for this setting. Use the and cursor buttons to select "Surround cursor buttons to back" and then use the and select the surround back speaker setting. · If "None" is selected for the Surround setting, this setting will not appear. · If "Small" is selected for the Surround setting, "Large" cannot be selected for this setting. 37 Configuring the speakers Setting the speaker distance from your normal listening position Each speaker can be set between 1 and 30 feet (0. 3 and 9 meters) in 1-foot (0. 3 meter) increments. Select the setting closest to the actual distance from the speaker to your normal listening position. Note: Speakers that you selected "No" or "None" for in the "Speaker Config" menu will not appear in this menu. Speaker Distance" on the main menu and then press the ENTER button. Use the and cursor buttons to select "Surround Back" and then use the and cursor buttons to set the distance from the surround back speakers to your normal listening position. Press the MENU button on the front panel or SETUP button on the remote controller button to exit the Setup menu. Calibrating the speaker levels Use this menu to set the volume for each speaker so that each volume is heard by the listener at the same level. This is especially important for speaker layouts where the left and right speakers are at different distances or in asymmetrical positions due to room designs and configurations. These settings and the distance settings performed in the Speaker Distance menu are vital to create the proper sound space and dynamics. Note: The speaker level settings here are not effective for multi-channel input sources. To adjust the speaker levels for multi-channel input sources, you will need to use the CH SEL, LEVEL , and LEVEL buttons on the remote controller. Level Calibration" on the main menu and then press the ENTER button. The "Level Calibration" menu appears. * Menu ***************** 1. Speaker Config 2. Speaker Distance 3. Level Calibration 4. Input Setup 5. OSD Setup 6. Preference * Menu ***************** 1. Speaker Config 2. Speaker Distance 2. Speaker Distance *********************** 3. Level Calibration 4. Input Setup a. Unit :feet 5. OSD Setup b. Front L/R :12ft 6. Preference c. Center :12ft d. Surround L/R : 7ft e. Surround Back : 7ft |ENTER|Quit:|SETUP| Quit:|SETUP| 2. Use the and cursor buttons to select "Unit" and and cursor buttons to select the then use the desired unit of measure. Use the and cursor buttons to select "Front L/R" cursor buttons to set the and then use the and distance from the front speakers to your normal listening position. [. . . ] "Not available in this Sp Config" Will not work with the current speaker configuration settings. "Not available in Zone 2 mode" (TX-SR700/700E only) Setting not allowed because the Zone 2 mode is turned on. "Only available with Dolby D" No setting other than Dolby Digital can be set. "Not available in this Listening mode" Will not work with the current listening mode. [. . . ]