User manual ONKYO TX-SR800

[. . . ] Contents AV Receiver Before using 2 TX-SR800 Instruction Manual Facilities and connections 8 Setup and operation 29 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote controller 61 Appendix 73 E WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Below is an example of recording the sound from a compact disc player connected to CD IN and the video from a video camera connected to VIDEO 5 INPUT to video cassette tape in a video cassette recorder connected to the VIDEO 1 OUT jack. Set "VIDEO 5" for the Video setting in the Video Setup sub-menu of the Setup menu: Input Setup Video Setup Video. Insert a CD in the CD player and insert a tape in the video camera connected to the VIDEO 5 INPUT. Insert a video tape for recording in the video cassette recorder connected to VIDEO 1 OUT. Press the REC OUT button repeatedly until "Rec Sel:SOURCE" appears in the front display. Now "CD" has been selected as the audio input source and "VIDEO 5" as the video input source. Start recording on the video cassette recorder and start playing at the CD player and video camera as desired. Notes: · If you change the input source during recording, you will record the audio signals from the newly selected input source and the video signals assigned to that input source. · You cannot record the surround effects. 38 Setup Menu When making the various settings required to configure your TX-SR800 for optimum performance, you can either use the OSD Menu that appears on your television monitor or you can use the display on the front of the TX-SR800. For your reference when performing the setting procedures, this manual shows both the OSD Menu displayed on your television monitor and the display on the front of the TX-SR800. The Setup Menu consists of the Basic Menu that is divided up into 4 menus, the Hardware Setup Menu, Speaker Setup Menu, Input Setup Menu, and Audio Adjust Menu, and the Advanced Menu that contains the menus of the Basic Menu plus the Preference Menu. These menus are then divided up into various sub-menus, and these contain settings for you to optimize your home theater as you wish. The actual contents of your display may differ depending on the model of your region and the selected input source. 0. Hardware Setup 1. Speaker Impedance 0. Hardware Setup 1. Speaker Impedance 2. Surr Back/Zone2 3. IR IN Setup 4. AM Frequency Setup Basic Menu Your TX-SR800 is provided with a Basic Menu for those who are not familiar with many of the advanced settings of an AV receiver or those who wish to watch movies and listen to music with the minimal amount of setup. With the Basic Menu, the settings that rarely need to be set or that are only needed for advanced fine-tuning of the sound quality are not displayed. 2. Surr Back/Zone2 3. IR IN Setup |ENTER|Quit:|SETUP| 1. Speaker Setup 1. Speaker Config 2. Speaker Distance 3. Level Calibration |ENTER|Quit:|SETUP| 1. Speaker Setup 1. Speaker Config 2. Speaker Distance 3. Level Calibration |ENTER|Quit:|SETUP| Basic Menu 0. Hardware Setup 1. Speaker Setup 2. Input Setup 3. Audio Adjust Advanced Menu |ENTER|Quit:|SETUP| |ENTER|Quit:|SETUP| 3. Audio Adjust 1. Tone Control 2. Surround Speakers 2. Input Setup Input:DVD 1. Digital Setup 2. Multichannel Setup 3. Video Setup 4. Character Input 5. IntelliVolume |ENTER|Quit:|SETUP| 2. Input Setup Input:DVD 1. Digital Setup 2. Multichannel Setup 3. Video Setup 4. Character Input 5. IntelliVolume 6. Listening Mode Preset |ENTER|Quit:|SETUP| 3. Audio Adjust 1. Tone Control 2. Surround Speakers 3. Sound Effect 4. Delay 5. LFE Level 6. Mono 7. Theater Dimensional 8. Surround Note: Once you complete the settings in the Hardware Setup Menu, the menu will not appear again when you enter the Basic Menu. 3. Sound Effect default 3. Audio Adjust Advanced Menu The Advanced Menu provides features such as the Listening Mode Presets that allow you to customize the output sound for movies and music just the way you like and the AV Sync Setup that allows you to adjust for discrepancies between the video and audio timing. Settings listed with next to their name are settings that can be set using the Advanced Menu. Advanced Menu 0. Hardware Setup 1. Speaker Setup 2. Input Setup 3. Audio Adjust 4. Preference Basic Menu |ENTER|Quit:|SETUP| 9. THX 10. Mono Movie 11. Enhanced 7 12. Orchestra 13. Unplugged 14. Studio Mix 15. TV Logic default 4. Preference 1. Volume Setup 2. Headphones Level 2. Headphone Level Setup 3. OSD Setup 4. OSD Position |ENTER|Quit:|SETUP| Quit:|SETUP| 39 Setup Menu Advanced Menu 0. Hardware Setup 1. Speaker Setup 2. Input Setup 3. Audio Adjust 4. Preference Basic Menu |ENTER|Quit:|SETUP| 1. Speaker Setup 1. Speaker Config 2. Speaker Distance 3. Level Calibration a. Subwoofer :Yes b. Front :Small c. Center :Small d. Surr L/R :Small e. Surr Back :Small f. Crossover:80Hz(THX) Quit:|SETUP| 1-1. Speaker Config |ENTER|Quit:|SETUP| Main menu Menu Sub-menu Navigating through the Setup Menu You can change settings in the Setup Menu using the buttons on the front panel and on the remote controller. The buttons on the remote controller correspond to those on the TXSR800 as shown below. 1. The main menu (Advanced Menu or Basic Menu) appears on your television monitor. Use the and cursor buttons to select the submenu that you want to enter and press the ENTER button. Each sub-menu has different settings that can be changed as desired, and they are all explained in the pages that follow. To change a setting, first select it using the and cursor buttons, and then change the setting using the and cursor buttons. Press the RETURN button to set the new settings and return to the previous menu screen. Note: Press the SETUP button to exit the Setup Menu immediately. Button on remote controller SETUP Button on TX-SR800 SETUP SETUP (upper edge of ENTER button) UP (lower edge of ENTER button) DOWN (left edge of ENTER button) LEFT (right edge of ENTER button) RIGHT ENTER ENTER ENTER RETURN RETURN RETURN 40 Hardware Setup 0. [. . . ] "Not available in this Sp Config" Will not work with the current speaker configuration settings. "Not available in Zone 2 mode" Setting not allowed because the Zone 2 mode is turned on. "Only available with Dolby D" No setting other than Dolby Digital can be set. "Not available in this Listening mode" Will not work with the current listening mode. [. . . ]