User manual ONKYO TX-SV343

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safeguards 1. Read Instructions ­ All the safety and operating instructions should be read before the appliance is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well. When making digital recordings, consult the instruction manual that came with your digital recording equipment (e. g. , MD recorder or DAT deck) to know what restrictions are imposed. · You cannot record the source connected to the MULTI CHANNEL INPUT connector. · When listening to music in the remote zone (see previous page), you can record the music or video that is being played in the main zone. · If you select FM (or AM) with the TUNER input source button when the recording source is set to AM (or FM), the output for the recording source also changes to AM (or FM). Notes: · Be aware that the remote (Zone 2) and recording (REC OUT) outputs use the same circuit and therefore cannot be used at the same time. · Digital signals input to the DIGITAL INPUT (COAX) and DIGITAL INPUT (OPT) inputs will be output to the DIGITAL OUTPUT (OPT) outputs. When making digital recordings, consult the instruction manual that came with your digital recording equipment (e. g. , MD recorder or DAT deck) to know what restrictions are imposed. · You cannot record the source connected to the MULTI CH INPUT connector. · You cannot listen to a broadcast from one station while recording the broadcast from another. 37 Recording a source Recording the video from one source and the audio from another You can add the sound from one source to the video of another source to make your own video recordings. Below is an example of recording the sound from a compact disc player connected to CD IN and the video from a video camera connected to VIDEO 5 INPUT to video cassette tape in a video cassette recorder connected to the VIDEO 1 OUT jack. Set "VIDEO 5" for the Video setting in the Video Setup sub-menu of the Setup menu: Input Setup Video Setup Video. Once you have selected one of the Hardware Setup menu items, the setting will not be displayed again when you enter the Basic Menu. To change the setting at a later date, select the Advanced Menu to display the Hardware Setup Menu. a. Surr Back/Zone 2 Zone 2: Select when connecting the speakers for the remote zone (Zone 2) to the SURR BACK/ZONE 2 PRE OUT or SURR BACK/ZONE 2 SPEAKERS terminals (for using the internal amplifier for Zone 2). Surr Back: Select when connecting the speakers for the Surround back to the SURR BACK/ZONE 2 PRE OUT or SURR BACK/ZONE 2 SPEAKERS terminals (for using the internal amplifier for the surround back speakers). Note: The SURR BACK/ZONE 2 PRE OUT and SURR BACK/ZONE 2 SPEAKER terminals In order to have 7. 1-channel playback in the main room, you must set the Surr Back/Zone 2 setting to "Surr Back. " When set to "Surr Back, " the surround back signals are output from the SURR BACK/ ZONE 2 PRE OUT and SURR BACK/ZONE 2 SPEAKER terminals. Connect the surround back speakers to the SURR BACK/ ZONE 2 SPEAKER terminals or to the speakers terminals of the power amplifier connected to the SURR BACK/ZONE 2 PRE OUT terminals. When you are not using the surround back speakers in the main room and using the internal amplifier to power the speakers for the remote zone (Zone 2), set the Surr Back/Zone 2 setting to "Zone 2. " When set to "Zone 2, " the Zone 2 signals are output from the SURR BACK/ZONE 2 PRE OUT and SURR BACK/ZONE 2 SPEAKER terminals. Connect the remote zone (Zone 2) speakers to the SURR BACK/ZONE 2 SPEAKER terminals or to the speakers terminals of the power amplifier connected to the SURR BACK/ZONE 2 PRE OUT terminals. At this time, the main room is switched to 5. 1 channel playback mode, and therefore you cannot select the THX Surround EX or DTS-ES, which requires the sound back. 0-1. Speaker Impedance Sub-menu Use this sub-menu to set the impedance level of the TX-SV343 to match the specifications of the speakers you are using. If the impedances of all speakers are between 6 and 16 , select "6 ohms. " If the impedance of even one speaker is between 4 and 6 , select "4 ohms. " Note: Before you change this setting, be sure to first lower the volume at the TX-SV343 to the minimum level. Advanced Menu 0. Hardware Setup 0-1. Speaker Impedance a. Minimum :6 ohms Quit:|SETUP| 41 Hardware Setup 0-3. [. . . ] © Point the remote controller at the remote sensor of the TXSR800 (see page 7). © Operate the remote controller within 16 feet (5 meters) (see page 7). · Remote controller is functioning in a different mode © Press the RCVR MODE button. 74 Troubleshooting guide If one of the messages shown below appears "Not available with headphones use" Operation not allowed because headphones are plugged into the TXSR800. "Not available with Multichannel use" Operation not allowed while the multi-channel output is being used. [. . . ]