User manual ONKYO TX-SV434

[. . . ] 62 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] In this case, switch to Manual Tuning mode and listen to the station in mono. Note: · You can also use the remote controller's Up and Down [ ]/[ ] buttons to tune the radio. 38 Listening to the Radio--Continued Tuning into Stations by Frequency You can tune into AM and FM stations directly by entering the appropriate frequency. ON/STANDBY REMOTE MODE 2 MEMORY Press the [MEMORY] button. The MEMORY indicator appears and the preset number flashes. RECEIVER TAPE DVD M D/CDR RECEIVER INPUT SELECTOR Number buttons D TUN 1 V1 2 V2 3 V3 CD HDD 4 7 TAPE 5 MULTI CH 6 DVD TV 3 CH +/­ TUNING PRESET 8 TUNER 9 CD VCR 12 CABLE 10 11 +10 D TUN 0 ENT DIMMER CLR SLEEP SAT --/--- While the MEMORY indicator is displayed (about 8 seconds), use the PRESET [ ]/[ ] buttons to select a preset from 1 through 40. ENTER TV INPUT GUIDE TOP MENU VOL DISC ALBUM CH VOL PREVIOUS MENU SP A / B MUTING ENTER PLAYLIST/CAT PLAYLIST/CAT 4 MEMORY RETURN SETUP 1 RECEIVER Press the [RECEIVER] button, followed by the [D TUN] button. Press the [MEMORY] button again to store the station or channel. The station or channel is stored and the preset number stops flashing. Repeat this procedure for all of your favorite AM/FM radio stations and XM channels. D TUN (Actual display depends on country. ) The [RECEIVER] button flashes. Selecting Presets 1 TUNING PRESET 2 Within 8 seconds, use the number buttons to enter the frequency of the radio station. Note: While the [RECEIVER] button is flashing, the input source cannot be changed by using the remote controller. ENTER To select a preset, use the PRESET [ ]/[ ] buttons, or the remote controller's CH [+/­] button. DISC ALBUM CH Deleting Presets Presetting AM/FM Stations and XM Channels PRESET MASTER VOLUME TUNING PRESET 1 2 MEMORY TUNING MODE CLEAR R Select the preset that you want to delete. While holding down the [MEMORY] button, press the [TUNING MODE] button. The preset is deleted and its number disappears from the display. STANDBY/ON STANDBY ENTER MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD RETURN SETUP VCR VIDEO 3 INPUT PHONES SPEAKERS A B TONE STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE VIDEO L AUDIO CLEAR MEMORY TUNING MODE You can store a combination of up to 40 of your favorite AM/FM radio stations and XM channels as presets. 1 Tune into the AM/FM station or XM channel that you want to store as a preset. See page 42 to select XM channels. 39 Listening to the Radio--Continued Using RDS (European Models Only) RDS only works with European models and only in areas where RDS broadcasts are available. When tuned into an RDS station, the RDS indicator appears. RDS indicator RDS Program Types (PTY) Type None News reports Current affairs Display NONE NEWS AFFAIRS Description No program type. Topical reporting of current affairs, often with a wider range of topics than news reports. The AV receiver searches until it finds a station that's broadcasting TP. If no stations are found, the message "Not Found" appears. 3 2 RT/PTY/TP Press the [RT/PTY/TP] button twice. Use the PRESET [ ]/[ ] buttons to select the type of program you want. See the table on page 40. ENTER ENTER 3 TUNING PRESET 41 Listening to the Radio--Continued Listening to XM Satellite Radio® (North American Models Only) Important XM Radio Information To receive XM Radio on this receiver you need to purchase an optional XM Passport System and subscribe to XM's paid programming. Please note that XM is currently only licensed to provide service to the contiguous 48 United States (not available in Alaska and Hawaii) and portions of Canada. XM Radio service is not currently available in Mexico or any other region outside the continental U. S. For updates on service availability please visit XM's website at http://www. xmradio. com or http://www. xmradio. ca Note: Hardware and required basic monthly subscription sold separately. Installation costs and other fees and taxes, including a one-time activation fee may apply. XM offers more than 160 digital channels of audio entertainment, including 100% commercial-free music channels, in the top markets in the U. S. Channel blocking is available for XM radio receivers by calling 1-800-XMRADIO. About XM Canada: XM Canada offers the most commercial-free music ­ and engaging talk show programs. [. . . ] Once it has been charged, the AV receiver will retain the settings for several weeks, although this depends on the environment and will be shorter in humid climates. The following settings can be made for the S-Video and composite video inputs You must use the buttons on the unit to make these settings. While holding down the input selector button for the input source that you want to set, press the [SETUP] button. · Video Attenuation This setting can be made for the DVD, VIDEO 1, VIDEO 2, or VIDEO 3 input. If you have a games console connected to an S-Video or composite video input, and the picture isn't very clear, you can attenuate the gain. [. . . ]